From 2dd48c4615a67ebb1762c2b0d79801be1949fcfb Mon Sep 17 00:00:00 2001 From: Christian Schmidbauer Date: Sat, 14 Nov 2026 14:36:39 +0100 Subject: [PATCH] net: stmmac: dwmac1000: stop hardware from dropping checksum-error packets When the checksum offload engine (CoE) is enabled, the dwmac1000 MAC silently drops any frame for which the engine detects a checksum error, before the driver sees it. This breaks VXLAN over IPv6 with zero UDP checksums, which RFC 6935 and RFC 6936 allow for tunnels. Set DMA_CONTROL_DT so that such frames are delivered instead of dropped, as commit fe4042797651 ("net: stmmac: dwmac4: stop hardware from dropping checksum-error packets") did for dwmac4. CoE remains enabled, so the driver still sees the error status and marks the skb CHECKSUM_NONE for the stack to verify. Set the bit only with enhanced descriptors. The normal descriptor parser does not report a checksum-only error to the stack, so cores that use it keep dropping such frames in hardware anyway. Tested on an Aruba AP-325 (ipq806x-gmac-dwmac) with Rx checksum offload on. Link: https://lore.kernel.org/all/20250625132117.1b3264e8@kernel.org/ Link: https://github.com/freifunk-gluon/gluon/issues/3783 Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.") Cc: # 6.6.x: ee0aace5f844: net: stmmac: Correctly handle Rx checksum offload errors Cc: # 6.6.x Signed-off-by: Christian Schmidbauer Reviewed-by: Maxime Chevallier Tested-by: Maxime Chevallier Link: https://patch.msgid.link/20261114133640.3285413-4-opensource@grische.xyz Signed-off-by: Paolo Abeni --- drivers/net/ethernet/stmicro/stmmac/dwmac1000.h | 2 +- drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 8 ++++++++ 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h index 1de1f929d61c..55d9c39287f1 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h @@ -162,7 +162,7 @@ enum rx_tx_priority_ratio { /* DMA CRS Control and Status Register Mapping */ /* DMA operation mode defines (start/stop tx/rx are placed in common header)*/ -/* Disable Drop TCP/IP csum error */ +#define DMA_CONTROL_DT 0x04000000 /* Disable Drop of TCP/IP csum errors */ #define DMA_CONTROL_RSF 0x02000000 /* Receive Store and Forward */ #define DMA_CONTROL_DFF 0x01000000 /* Disaable flushing */ /* Threshold for Activating the FC */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c index 3ac7a7949529..31d5f79ef560 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c @@ -15,6 +15,7 @@ #include #include "dwmac1000.h" #include "dwmac_dma.h" +#include "stmmac.h" static void dwmac1000_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi) { @@ -129,6 +130,13 @@ static void dwmac1000_dma_operation_mode_rx(struct stmmac_priv *priv, { u32 csr6 = readl(ioaddr + DMA_CHAN_CONTROL(channel)); + /* Deliver checksum-error frames only with enhanced + * descriptors, because the normal descriptor parser does not + * report a checksum-only error. + */ + if (priv->plat->enh_desc) + csr6 |= DMA_CONTROL_DT; + if (mode == SF_DMA_MODE) { pr_debug("GMAC: enable RX store and forward mode\n"); csr6 |= DMA_CONTROL_RSF | DMA_CONTROL_DFF;