mirror of
https://github.com/torvalds/linux.git
synced 2026-11-20 13:03:48 +00:00
Some hardware can autonomously activate/deactivate hardware control. After that, the LED hardware notifies the LED driver. Currently, there is no mechanism for LED drivers to notify the LED core about such events and initiate a trigger transition to reflect the hardware state. Add a new interface called led_trigger_notify_hw_control_changed(), so that LED drivers can call it to notify the LED core about the transition. The interface only allows two transitions: 1. "none" => private trigger 2. private trigger => "none" If the current trigger is neither the private trigger nor "none", no transition will be made. This protects the currently selected software trigger. Note that LED_OFF won't be emitted during the #2 transition, as some hardware may have selected a new brightness level during its hardware state transition (e.g., laptop keyboards with a shortcut cycling through different backlight brightnesses and auto mode). The interface is designed as a void function as any failure should be non-fatal and the result of transition should not have any impact on the LED drivers' event handling procedures. To use the interface, the config LEDS_TRIGGERS_HW_CHANGED must be enabled, and the LED driver must set the LED_TRIG_HW_CHANGED flag for the classdev. By default, the config is enabled when LEDS_BRIGHTNESS_HW_CHANGED is enabled. Acked-by: Ike Panhc <[email protected]> Signed-off-by: Rong Zhang <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Lee Jones <[email protected]>