Merge tag 'net-next-7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
 "This includes a significant number of low-priority fixes - especially
  in the NIC drivers area - that we deferred from the last few RCs in
  the previous cycle, which can't be easily outlined in the synopsis
  below.

  Core & protocols:

   - Continue the work on removing rtnl_lock dependencies:
      - per-netns ARP and ND neighbour tables, with the default settings
        now configurable per netns (inheritance from init_net is
        controlled by the new net.core.neigh_inherit_init_net sysctl)
      - RCU-protected configuration and rtnl_lock-less fill_info() for
        hsr, netkit, sit, vlan and vxlan devices
      - per-netns device unregistration for ip tunnel and gre devices
      - use the netdev instance lock instead of rtnl_lock when reading
        speed and duplex via sysfs
      - batch the flushing of uncached routes at device unregistration
        time, relieving rtnl_lock contention on netns dismantle.

   - Add hardware pacing offload support, admin-controlled via a new
     rtnetlink attribute, with sch_fq integration (implemented in idpf).

   - Re-segment BIG TCP GSO packets into GSO packets fitting the egress
     device limits instead of plain MSS-sized segments, improving
     throughput for mixed BIG TCP / non-BIG TCP paths by up to 70%.

   - Generate RSS keys that spread flows over all the RX queues; the
     previous random keys could leave some queues unused.

   - Optimize the bridge VLAN forwarding paths: cache the port-VLAN in
     fdb entries and consider only VLAN members when flooding, for ~10%
     more Mpps in the fdb forwarding path.

   - A few TCP/IP performance improvements aimed at efficient cache
     usage and reducing contention.

   - Add the TCP ROCCET congestion control, a CUBIC variant aimed at
     avoiding bufferbloat in cellular networks.

   - Continue the conversion of getsockopt callbacks to sockopt_t.

   - Add an ethtool command to list the front-facing ports of an
     interface, including SFP cages and modules, using the phy_port
     representation.

   - Enable BIG TCP support for bareudp tunnels.

   - Remove the IPV6_ADDRFORM socket option and disallow buggy TCP state
     transitions (listen() + shutdown() + connect() and connect() +
     connect(AF_UNSPEC) + listen()).

   - Remove most BUG_ON()s from core packet processing, replacing them
     with error paths.

  Wireless:

   - Latency improvements, including lockless station get/dump and
     beacon updates, plus RTNL reduction and locking cleanups.

   - Infrastructure for non-station TX/RX with MLO.

   - NAN (Wi-Fi Aware) Instant Communication support and other NAN
     improvements.

   - Control frame Integrity Protocol (CIP) and protected TWT support.

   - Improvements for AP regulatory checks.

  Netfilter:

   - Disable br_netfilter in user namespaces and schedule it for removal
     in 2027.

   - Restrict the raw table in nft_compat to the specific family, hook
     and priority.

   - Prepare the flowtable for mixed IPv4-over-IPv6 tunneling (and vice
     versa).

   - Use GFP_KERNEL_ACCOUNT for most netfilter allocations, for better
     integration with memcg.

   - Allow discovering conntrack zone filtering support in ctnetlink
     dumps, and fix nfnetlink_hook handling of large dumps.

  Deletions:

   - Move the LLC type 2 sockets out of tree. There are no known users
     and the code attracts a never-ending stream of LLM-driven fixes.

  Device drivers:

   - New drivers:
      - Meta Platforms NIC (mpnic), the second-generation NIC from Meta
      - initial skeleton of the Nebula-matrix NICs driver (nbl)
      - X-Powers AC200/AC300 Fast Ethernet PHYs

   - Ethernet high-speed NICs:
      - Intel:
         - i40e: XDP metadata support for RX hash and VLAN tag
         - ice: expose the E825 TSPLL state via the DPLL subsystem
      - nVidia/Mellanox:
         - move the data direct infrastructure from IB to core, in
           preparation for netdev support.
         - reduce the memory used per offloaded TC rule
      - Meta (fbnic):
         - support large io_uring zero-copy RX buffers
      - Microsoft vNIC (mana):
         - add BQL support

   - Ethernet NICs consumer, and embedded:
      - Airoha:
         - LRO offload support
      - Cadence (macb):
         - context swapping for ringparam and MTU changes, avoiding
           buffer loss under memory pressure
      - Mucse (rnpgbe):
         - TX/RX and link status support
      - NXP (enetc):
         - SR-IOV improvements and VF support for ENETC v4
      - Qualcomm (ppe):
         - IPQ5424 support
      - Realtek PCI (r8169):
         - phylink support
         - RSS support for RTL8127
      - Renesas (ravb):
         - gPTP support for R-Car Gen4
      - Synopsys (stmmac):
         - XDP multi-buffer support on the TX side
         - tc mqprio hw queue priority offload
         - support for RK3568 SGMII, Allwinner H616 EMAC1, UltraRISC
           DP1000 and Qualcomm sa8255p

   - Ethernet switches:
      - Mediatek (mt7530):
         - fast age and change conduit support
      - Microchip (ksz):
         - support for KSZ8995XA/KS8995XA
      - Microchip (lan966x):
         - PCIe FDMA support, ~20x throughput increase in PCIe endpoint
      - Microchip (sparx5):
         - Time Aware Shaper (taprio) offload
      - Motorcomm (yt921x):
         - LED and SerDes PCS support
      - Realtek (rtl8365mb):
         - EEE support

   - Ethernet PHYs:
      - Broadcom:
         - enable jumbo frames on BCM54xx
      - Realtek:
         - support for RTL8261CE_CG and RTL8261D_VM
         - MDIO support for RTL838x and RTL839x

   - WiFi drivers:
      - Broadcom (brcmfmac):
         - FT/OKC roaming offload
      - Intel (iwlwifi):
         - UHR sniffer support
         - support for newer UEFI/BIOS tables
      - MediaTek (mt76):
         - mt7925 NAN improvements
         - offchannel/scan improvements and MLO fixes
      - Morse Micro (mm81x):
         - monitor mode support
      - Qualcomm (ath12k):
         - IPQ5332 platform infrastructure
      - Realtek (rtw88):
         - RTL8723BS support
         - SDIO TX performance improvements
      - Realtek (rtw89):
         - P2P_DEVICE support
         - BT-coex updates for RTL8922D

   - Bluetooth:
      - move H:4 reassembly into the Bluetooth core
      - add generic support for vendor packets
      - MGMT: add security level changed event

   - Bluetooth drivers:
      - btusb: support Bulk Serialization Mode
      - Intel: support Draco and Titan Lake, allow unsigned firmware
      - Mediatek: MT7928 support
      - Qualcomm: QCC2072 support
      - Broadcom: Synaptics 4384 support"

* tag 'net-next-7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2126 commits)
  Bluetooth: btusb: disable by default Qualcomm multi-subsystem
  tipc: fix broadcast sender hang on last acker departure
  tipc: fix use-after-free of broadcast reception link at node release
  r8169: clear TX LPI on RTL8168h at link up after phylink conversion
  tun: Require CAP_NET_ADMIN to attach to an ownerless device
  net/sched/sch_cake: drop dead nla_nest_end() error check
  net/sched/sch_cake: widen buffer_used to u64
  net/sched/sch_cake: reduce parent backlog when clearing a tin
  net/sched/sch_cake: serialize reconfiguration with the datapath
  tg3: Add Datto SIRIS 5 1U Server to restart AER quirk table
  net/mlx5e: Stop asserting for RTNL when closing channels
  net: shrink the payload-only part of skb dataref to one bit
  net: wwan: iosm: validate msg_head before indexing msg_ring
  net: bgmac: rate limit RX error messages
  selftests: net: veth: test XDP_TX to a peer with GRO enabled
  veth: schedule the peer's NAPI after XDP_TX when only GRO is enabled
  pppoe: delete session hash entries by pointer match
  net: lan969x: don't disable hardirqs in fdma tx clear
  net: sparx5/lan969x: do not clobber the PSFP cycle timer update period
  net: lan969x: fix DSM calendar for empty taxis
  ...
This commit is contained in:
Linus Torvalds
2026-10-22 15:58:00 -10:00
2066 changed files with 94311 additions and 110145 deletions
+11 -3
View File
@@ -10,6 +10,7 @@
#
# Please keep this list dictionary sorted.
#
Aaradhana Sahu <[email protected]> <[email protected]>
Aaron Durbin <[email protected]>
Abel Vesa <[email protected]> <[email protected]>
Abel Vesa <[email protected]> <[email protected]>
@@ -131,7 +132,8 @@ Axel Dyks <[email protected]>
Axel Lin <[email protected]>
Balakrishna Godavarthi <[email protected]> <[email protected]>
Banajit Goswami <[email protected]> <[email protected]>
Baochen Qiang <quic_bqiang@quicinc.com> <[email protected]>
Baochen Qiang <[email protected].com> <[email protected]>
Baochen Qiang <[email protected]> <[email protected]>
Baolin Wang <[email protected]> <[email protected]>
Baolin Wang <[email protected]> <[email protected]>
Baolin Wang <[email protected]> <[email protected]>
@@ -583,6 +585,7 @@ Maheshwar Ajja <[email protected]> <[email protected]>
Maíra Canal <[email protected]> <[email protected]>
Malathi Gottam <[email protected]> <[email protected]>
Manikanta Pubbisetty <[email protected]> <[email protected]>
Manish Dharanenthiran <[email protected]> <[email protected]>
Manivannan Sadhasivam <[email protected]> <[email protected]>
Manivannan Sadhasivam <[email protected]> <[email protected]>
Manoj Basapathi <[email protected]> <[email protected]>
@@ -639,6 +642,7 @@ Mayuresh Janorkar <[email protected]>
Md Sadre Alam <[email protected]> <[email protected]>
Miaoqing Pan <[email protected]> <[email protected]>
Michael Buesch <[email protected]>
Michael Chan <[email protected]> <[email protected]>
Michael Grzeschik <[email protected]> <[email protected]>
Michael Grzeschik <[email protected]> <[email protected]>
Michael Riesch <[email protected]> <[email protected]>
@@ -772,6 +776,8 @@ Rakesh Pillai <[email protected]> <[email protected]>
Ralf Baechle <[email protected]>
Ralf Wildenhues <[email protected]>
Ram Chandra Jangir <[email protected]> <[email protected]>
Rameshkumar Sundaram <[email protected]> <[email protected]>
Rameshkumar Sundaram <[email protected]> <[email protected]>
Randy Dunlap <[email protected]> <[email protected]>
Randy Dunlap <[email protected]> <[email protected]>
Randy Dunlap <[email protected]> <[email protected]>
@@ -870,7 +876,8 @@ Sricharan Ramabadhran <[email protected]> <[email protected]>
Srinivas Kandagatla <[email protected]> <[email protected]>
Srinivas Kandagatla <[email protected]> <[email protected]>
Srinivas Ramana <[email protected]> <[email protected]>
Sriram R <quic_srirrama@quicinc.com> <srirrama@codeaurora.org>
Sriram R <sriram.rama[email protected].com> <quic_srirrama@quicinc.com>
Sriram R <[email protected]> <[email protected]>
Sriram Yagnaraman <[email protected]> <[email protected]>
Stanislav Fomichev <[email protected]> <[email protected]>
Stanislav Fomichev <[email protected]> <[email protected]>
@@ -954,7 +961,8 @@ Vadim Fedorenko <[email protected]> <[email protected]>
Valdis Kletnieks <[email protected]>
Vara Reddy <[email protected]> <[email protected]>
Varadarajan Narayanan <[email protected]> <[email protected]>
Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> <vthiagar@codeaurora.org>
Vasanthakumar Thiagarajan <[email protected].com> <quic_vthiagar@quicinc.com>
Vasanthakumar Thiagarajan <[email protected]> <[email protected]>
Vasily Averin <[email protected]> <[email protected]>
Vasily Averin <[email protected]> <[email protected]>
Vasily Averin <[email protected]> <[email protected]>
@@ -75,20 +75,6 @@ Description:
the ID of the AP endpoint on which packets destined
for the embedded modem are sent.
What: .../XXXXXXX.ipa/endpoint_id/monitor_rx
Date: July 2022
KernelVersion: v5.19
Contact: Alex Elder <[email protected]>
Description:
The .../XXXXXXX.ipa/endpoint_id/monitor_rx file contains
the ID of the AP endpoint on which IPA "monitor" data is
received. The monitor endpoint supplies replicas of
packets that enter the IPA hardware for processing.
Each replicated packet is preceded by a fixed-size "ODL"
header (see .../XXXXXXX.ipa/feature/monitor, above).
Large packets are truncated, to reduce the bandwidth
required to provide the monitor function.
What: .../XXXXXXX.ipa/modem/
Date: June 2021
KernelVersion: v5.14
+34 -3
View File
@@ -11,6 +11,35 @@ Contact: Jonathan Lemon <[email protected]>
Description: This directory contains the attributes of the Nth timecard
registered.
What: /sys/class/timecard/ocpN/cpld_status
Date: July 2026
Contact: Sagi Maimon <[email protected]>
Description: (RO, root only) The flags set in the status register of the
TAP CPLD, space separated, or an empty line when none is
set. Only present on ADVA x1 TAP boards (PCI ID
0xad5a:0x0410).
========== ================================================
done the configuration flash holds a valid image and
it is active
busy an internal operation is in progress
failed the last ISC operation failed
========== ================================================
For example "busy" while an operation runs, or "busy failed"
if a failure is latched while another one is in progress.
A read arbitrates for the shared I2C bus and reprograms the
on-card mux, so it is restricted to root. The Lattice device
ID of the CPLD is read by the driver shortly after probe,
and again after a successful CPLD update, and reported from
that cached value as the fixed "cpld.id" version by
devlink dev info.
New CPLD firmware is programmed with devlink dev flash,
selecting the "fw.cpld" component; see
Documentation/networking/devlink/ptp_ocp.rst.
What: /sys/class/timecard/ocpN/available_clock_sources
Date: September 2021
Contact: Jonathan Lemon <[email protected]>
@@ -156,9 +185,11 @@ Description: (RW) Used to start the signal generator, and summarize
period [duty [phase [polarity]]]
echo 500000000 > signal # 1/2 second period
echo 1000000 40 100 > signal
echo 0 > signal # turn off generator
::
echo 500000000 > signal # 1/2 second period
echo 1000000 40 100 > signal
echo 0 > signal # turn off generator
Period and phase are specified in nanoseconds. Duty cycle is
a percentage from 1-99. Polarity is 1 or 0.
+14
View File
@@ -413,6 +413,20 @@ new netns has been created.
Default : 0 (for compatibility reasons)
neigh_inherit_init_net
----------------------
Controls if a new network namespace should inherit all current
settings under /proc/sys/net/ipv{4,6}/neigh/default/.
By default, the value is set to 1, and all settings are inherited
from init_net.
If set to 0, both IPv4 and IPv6 settings are reset to their default
values.
Default : 1 (for compatibility reasons)
txrehash
--------
@@ -65,7 +65,7 @@ properties:
const: 0
patternProperties:
"^pin@[0-9]+$":
"^pin@[0-9a-f]+$":
$ref: /schemas/dpll/dpll-pin.yaml
unevaluatedProperties: false
@@ -40,6 +40,9 @@ properties:
description:
PHY regulator
power-domains:
maxItems: 1
required:
- compatible
- reg
@@ -21,6 +21,7 @@ select:
- allwinner,sun8i-r40-gmac
- allwinner,sun8i-v3s-emac
- allwinner,sun50i-a64-emac
- allwinner,sun50i-h616-emac1
- allwinner,sun55i-a523-gmac200
required:
- compatible
@@ -33,6 +34,7 @@ properties:
- const: allwinner,sun8i-r40-gmac
- const: allwinner,sun8i-v3s-emac
- const: allwinner,sun50i-a64-emac
- const: allwinner,sun50i-h616-emac1
- items:
- enum:
- allwinner,sun20i-d1-emac
@@ -91,6 +93,17 @@ required:
allOf:
- $ref: snps,dwmac.yaml#
- if:
properties:
compatible:
contains:
const: allwinner,sun50i-h616-emac1
then:
properties:
phy-mode:
const: rmii
- if:
properties:
compatible:
@@ -13,8 +13,6 @@ description:
This binding describes the Altera SOCFPGA SoC implementation of the
Synopsys DWMAC for the Cyclone5, Arria5, Stratix10, Agilex5 and Agilex7
families of chips.
# TODO: Determine how to handle the Arria10 reset-name, stmmaceth-ocp, that
# does not validate against net/snps,dwmac.yaml.
select:
properties:
@@ -158,6 +156,9 @@ properties:
- description: offset of the control register
- description: shift within the control register
power-domains:
maxItems: 1
patternProperties:
"^mdio[0-9]$":
type: object
@@ -158,6 +158,9 @@ properties:
interrupt-names:
const: macirq
power-domains:
maxItems: 1
required:
- compatible
- reg
@@ -31,6 +31,7 @@ properties:
- brcm,bcm43540-bt
- brcm,bcm4335a0
- brcm,bcm4349-bt
- brcm,bcm4384-bt
- cypress,cyw4373a0-bt
- infineon,cyw55572-bt
@@ -123,7 +123,7 @@ examples:
phy0: ethernet-phy@1 {
reg = <1>;
};
};
};
mdio@ce14 {
compatible = "brcm,asp-v2.1-mdio";
@@ -87,18 +87,6 @@ examples:
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/cortina,gemini-clock.h>
#include <dt-bindings/reset/cortina,gemini-reset.h>
mdio0: mdio {
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@1 {
reg = <1>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@3 {
reg = <3>;
device_type = "ethernet-phy";
};
};
ethernet@60000000 {
compatible = "cortina,gemini-ethernet";
@@ -110,28 +98,28 @@ examples:
ranges;
gmac0: ethernet-port@0 {
compatible = "cortina,gemini-ethernet-port";
reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
<0x6000a000 0x2000>; /* Port 0 GMAC */
interrupt-parent = <&intcon>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
resets = <&syscon GEMINI_RESET_GMAC0>;
clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
clock-names = "PCLK";
phy-mode = "rgmii";
phy-handle = <&phy0>;
compatible = "cortina,gemini-ethernet-port";
reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
<0x6000a000 0x2000>; /* Port 0 GMAC */
interrupt-parent = <&intcon>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
resets = <&syscon GEMINI_RESET_GMAC0>;
clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
clock-names = "PCLK";
phy-mode = "rgmii";
phy-handle = <&phy0>;
};
gmac1: ethernet-port@1 {
compatible = "cortina,gemini-ethernet-port";
reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
<0x6000e000 0x2000>; /* Port 1 GMAC */
interrupt-parent = <&intcon>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
resets = <&syscon GEMINI_RESET_GMAC1>;
clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
clock-names = "PCLK";
phy-mode = "rgmii";
phy-handle = <&phy1>;
compatible = "cortina,gemini-ethernet-port";
reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
<0x6000e000 0x2000>; /* Port 1 GMAC */
interrupt-parent = <&intcon>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
resets = <&syscon GEMINI_RESET_GMAC1>;
clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
clock-names = "PCLK";
phy-mode = "rgmii";
phy-handle = <&phy1>;
};
};
@@ -23,6 +23,7 @@ properties:
- microchip,ksz8864 # 4-port version of KSZ8895 family switch
- microchip,ksz8873
- microchip,ksz8895 # 5-port version of KSZ8895 family switch
- microchip,ksz8995xa
- microchip,ksz9477
- microchip,ksz9897
- microchip,ksz9896
@@ -21,6 +21,9 @@ description: |
Any port can be used as the CPU port.
Each port has at most 3 LEDs connected and can be declared using the standard
LEDs structure.
properties:
compatible:
const: motorcomm,yt9215
@@ -59,6 +62,7 @@ unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
mdio {
#address-cells = <1>;
@@ -113,6 +117,25 @@ examples:
label = "lan1";
phy-mode = "internal";
phy-handle = <&sw_phy0>;
leds {
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
color = <LED_COLOR_ID_WHITE>;
function = LED_FUNCTION_LAN;
default-state = "keep";
};
led@1 {
reg = <1>;
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_LAN;
default-state = "keep";
};
};
};
ethernet-port@1 {
@@ -8,6 +8,20 @@ title: Realtek switches for unmanaged switches
allOf:
- $ref: dsa.yaml#/$defs/ethernet-ports
- if:
not:
properties:
compatible:
contains:
const: realtek,rtl8365mb
then:
properties:
avddh-supply: false
avddl-supply: false
dvddio-supply: false
dvddio1-supply: false
dvddl-supply: false
pllvddl-supply: false
maintainers:
- Linus Walleij <[email protected]>
@@ -62,6 +76,24 @@ properties:
resets:
maxItems: 1
avddh-supply:
description: AVDDH high-voltage analog supply.
avddl-supply:
description: AVDDL low-voltage analog supply.
dvddio-supply:
description: DVDDIO digital I/O supply.
dvddio1-supply:
description: DVDDIO_1 secondary digital I/O supply for the RGMII bank.
dvddl-supply:
description: DVDDL digital core supply.
pllvddl-supply:
description: PLLVDDL PLL analog supply.
realtek,disable-leds:
type: boolean
description: |
@@ -243,6 +275,7 @@ examples:
platform {
ethernet-switch {
compatible = "realtek,rtl8365mb";
avddh-supply = <&avddh>;
mdc-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
mdio-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
@@ -127,8 +127,8 @@ examples:
phy-mode = "internal";
fixed-link {
speed = <1000>;
full-duplex;
speed = <1000>;
full-duplex;
};
};
};
@@ -120,6 +120,9 @@ properties:
- description: Optional offset of register controlling TXD delay
- description: Optional offset of register controlling RXD delay
power-domains:
maxItems: 1
required:
- compatible
- reg
@@ -11,7 +11,7 @@ maintainers:
properties:
$nodename:
pattern: "^ethernet(@.*)?$"
pattern: "^ethernet(@.+|-[0-9]+)?$"
label:
description: Human readable label on a port of a box.
@@ -269,6 +269,22 @@ properties:
have to be placed on board. When omitted, the PHYs default will be left as
is.
marvell,reg-init:
$ref: /schemas/types.yaml#/definitions/uint32-matrix
deprecated: true
description:
Register initialization tuples for Marvell PHYs.
items:
items:
- description: register page
maximum: 0xffff
- description: register number
maximum: 31
- description: mask of bits to preserve
maximum: 0xffff
- description: value to apply
maximum: 0xffff
leds:
type: object
@@ -125,10 +125,6 @@ required:
- reg
- fsl,fman-ports
dependencies:
pcs-handle-names:
- pcs-handle
allOf:
- $ref: ethernet-controller.yaml#
- if:
@@ -0,0 +1,170 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright 2025 Hisilicon Ltd.
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/hisilicon,hns-dsaf-v1.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Hisilicon DSA Fabric device controller
maintainers:
- Jian Shen <[email protected]>
- Jijie Shao <[email protected]>
properties:
compatible:
items:
- enum:
- hisilicon,hns-dsaf-v1
- hisilicon,hns-dsaf-v2
reg:
minItems: 1
items:
- description:
PPE register base and size
- description:
DSA Fabric base register and size (not required for single-port mode)
reg-names:
minItems: 1
items:
- const: ppe-base
- const: dsaf-base
interrupts:
minItems: 1
maxItems: 409
dma-coherent: true
'#address-cells':
const: 1
'#size-cells':
const: 0
mode:
description: DSA Fabric mode string
$ref: /schemas/types.yaml#/definitions/string
enum:
- 2port-64vf
- 6port-16rss
- 6port-16vf
- single-port
subctrl-syscon:
description: syscon handle for external interface control register
$ref: /schemas/types.yaml#/definitions/phandle
reset-field-offset:
description: offset of reset field in the control register
$ref: /schemas/types.yaml#/definitions/uint32
buf-size:
description: RX buffer size (bytes)
$ref: /schemas/types.yaml#/definitions/uint32
enum: [512, 1024, 2048, 4096]
desc-num:
description: number of descriptors in TX and RX queue
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 16
maximum: 1024
patternProperties:
"^port@[0-5]$":
description: DSA Fabric port node
$ref: ethernet-switch-port.yaml#
additionalProperties: false
properties:
reg:
maximum: 5
phy-handle: true
serdes-syscon:
description: syscon handle for SerDes register
$ref: /schemas/types.yaml#/definitions/phandle
cpld-syscon:
description: syscon handle plus register offset for CPLD register
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: CPLD phandle
- description: offset
port-rst-offset:
description: reset field offset for this port
$ref: /schemas/types.yaml#/definitions/uint32
port-mode-offset:
description: port mode field offset for this port
$ref: /schemas/types.yaml#/definitions/uint32
mc-mac-mask:
description: multicast MAC address mask
$ref: /schemas/types.yaml#/definitions/uint8-array
maxItems: 6
media-type:
$ref: /schemas/types.yaml#/definitions/string
enum:
- backplane
- copper
- fiber
required:
- reg
- serdes-syscon
required:
- compatible
- reg
- reg-names
- interrupts
- subctrl-syscon
- mode
- buf-size
- desc-num
additionalProperties: false
examples:
- |
dsa@c5000000 {
compatible = "hisilicon,hns-dsaf-v1";
#address-cells = <1>;
#size-cells = <0>;
mode = "6port-16rss";
reg = <0xc5000000 0x890000
0xc7000000 0x60000>;
reg-names = "ppe-base", "dsaf-base";
subctrl-syscon = <&subctrl>;
reset-field-offset = <0>;
interrupts = <131 4>, <132 4>, <133 4>, <134 4>,
<135 4>, <136 4>, <137 4>, <138 4>,
<139 4>, <140 4>, <141 4>, <142 4>,
<143 4>, <144 4>, <145 4>, <146 4>,
<147 4>, <148 4>, <384 1>, <385 1>,
<386 1>, <387 1>, <388 1>, <389 1>,
<390 1>, <391 1>;
buf-size = <4096>;
desc-num = <1024>;
dma-coherent;
port@0 {
reg = <0>;
phy-handle = <&phy0>;
serdes-syscon = <&serdes>;
mc-mac-mask = [ff f0 00 00 00 00];
};
port@1 {
reg = <1>;
serdes-syscon = <&serdes>;
mc-mac-mask = [ff f0 00 00 00 00];
};
};
@@ -0,0 +1,61 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/hisilicon,hns-mdio.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Hisilicon HNS MDIO bus controller
maintainers:
- Jian Shen <[email protected]>
- Jijie Shao <[email protected]>
allOf:
- $ref: mdio.yaml#
properties:
compatible:
enum:
- hisilicon,hns-mdio
- hisilicon,mdio
reg:
maxItems: 1
subctrl-vbase:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: syscon phandle
- description: MDIO clock enable register offset
- description: MDIO reset request register offset
- description: MDIO clock state register offset
- description: MDIO reset state register offset
required:
- compatible
- reg
- '#address-cells'
- '#size-cells'
- subctrl-vbase
unevaluatedProperties: false
examples:
- |
bus {
#address-cells = <2>;
#size-cells = <2>;
mdio@803c0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "hisilicon,hns-mdio";
reg = <0x0 0x803c0000 0x0 0x10000>;
subctrl-vbase = <&peri_c_subctrl 0x338 0xa38 0x531c 0x5a1c>;
ethernet-phy@0 {
reg = <0>;
};
};
};
@@ -0,0 +1,108 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/hisilicon,hns-nic.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Hisilicon Network Subsystem NIC controller
maintainers:
- Jian Shen <[email protected]>
- Jijie Shao <[email protected]>
allOf:
- $ref: ethernet-controller.yaml#
properties:
compatible:
enum:
- hisilicon,hns-nic-v1
- hisilicon,hns-nic-v2
ae-handle:
description:
accelerator engine handle for hns, specifies a reference to the
associating hardware driver node.
$ref: /schemas/types.yaml#/definitions/phandle
port-id:
description: |
is the index of port provided by DSAF (the accelerator). DSAF can connect to 8 PHYs.
Port 0 to 1 are both used for administration purpose.
They are called debug ports.
The remaining 6 PHYs are taken according to the mode of DSAF.
In NIC mode of DSAF, all 6 PHYs are taken as ethernet ports to the CPU.
The port-id can be 2 to 7. Here is the diagram:
+-----+---------------+
| CPU |
+-+-+-+---+-+-+-+-+-+-+
| | | | | | | |
debug service
port port
(0,1) (2-7)
In Switch mode of DSAF, all 6 PHYs are taken as physical ports connect to a LAN Switch,
while the CPU side assume itself have one single NIC connect to this switch.
In this case, the port-id will be 2 only.
+-----+---------------+
| CPU |
+-+-+-+---+-+-+-+-+-+-+
| | service| port(2)
debug +------------+
port | switch |
(0,1) +-+-+-+-+-+-++
| | | | | |
external port
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 7
deprecated: true
port-idx-in-ae:
description: |
is the index of port provided by AE.
In NIC mode of DSAF, all 6 PHYs of service DSAF are taken as ethernet ports to the CPU.
The port-idx-in-ae can be 0 to 5. Here is the diagram:
+-----+---------------+
| CPU |
+-+-+-+---+-+-+-+-+-+-+
| | | | | | | |
debug debug service
port port port
(0) (0) (0-5)
In Switch mode of DSAF, all 6 PHYs of service DSAF are taken as physical ports connected to
a LAN Switch,
while the CPU side assume itself have one single NIC connected to this switch.
In this case, the port-idx-in-ae will be 0 only.
+-----+-----+------+------+
| CPU |
+-+-+-+-+-+-+-+-+-+-+-+-+-+
| | service| port(0)
debug debug +------------+
port port | switch |
(0) (0) +-+-+-+-+-+-++
| | | | | |
external port
$ref: /schemas/types.yaml#/definitions/uint32
maximum: 5
dma-coherent: true
required:
- compatible
- ae-handle
- port-idx-in-ae
- local-mac-address
unevaluatedProperties: false
examples:
- |
ethernet {
compatible = "hisilicon,hns-nic-v1";
ae-handle = <&dsaf0>;
port-idx-in-ae = <0>;
local-mac-address = [a2 14 e4 4b 56 76];
};
@@ -1,90 +0,0 @@
Hisilicon DSA Fabric device controller
Required properties:
- compatible: should be "hisilicon,hns-dsaf-v1" or "hisilicon,hns-dsaf-v2".
"hisilicon,hns-dsaf-v1" is for hip05.
"hisilicon,hns-dsaf-v2" is for Hi1610 and Hi1612.
- mode: dsa fabric mode string. only support one of dsaf modes like these:
"2port-64vf",
"6port-16rss",
"6port-16vf",
"single-port".
- interrupts: should contain the DSA Fabric and rcb interrupt.
- reg: specifies base physical address(es) and size of the device registers.
The first region is external interface control register base and size(optional,
only used when subctrl-syscon does not exist). It is recommended using
subctrl-syscon rather than this address.
The second region is SerDes base register and size(optional, only used when
serdes-syscon in port node does not exist). It is recommended using
serdes-syscon rather than this address.
The third region is the PPE register base and size.
The fourth region is dsa fabric base register and size. It is not required for
single-port mode.
- reg-names: may be ppe-base and(or) dsaf-base. It is used to find the
corresponding reg's index.
- phy-handle: phy handle of physical port, 0 if not any phy device. It is optional
attribute. If port node exists, phy-handle in each port node will be used.
see ethernet.txt [1].
- subctrl-syscon: is syscon handle for external interface control register.
- reset-field-offset: is offset of reset field. Its value depends on the hardware
user manual.
- buf-size: rx buffer size, should be 16-1024.
- desc-num: number of description in TX and RX queue, should be 512, 1024, 2048 or 4096.
- port: subnodes of dsaf. A dsaf node may contain several port nodes(Depending
on mode of dsaf). Port node contain some attributes listed below:
- reg: is physical port index in one dsaf.
- phy-handle: phy handle of physical port. It is not required if there isn't
phy device. see ethernet.txt [1].
- serdes-syscon: is syscon handle for SerDes register.
- cpld-syscon: is syscon handle + register offset pair for cpld register. It is
not required if there isn't cpld device.
- port-rst-offset: is offset of reset field for each port in dsaf. Its value
depends on the hardware user manual.
- port-mode-offset: is offset of port mode field for each port in dsaf. Its
value depends on the hardware user manual.
- mc-mac-mask: mask of multicast address, determines bit in multicast address
to set:
1 stands for this bit will be precisely matched, TCAM will check this bit of
MAC address.
0 stands for this bit will be fuzzy matched, TCAM won't care about this bit
of MAC address.
[1] Documentation/devicetree/bindings/net/phy.txt
Example:
dsaf0: dsa@c7000000 {
compatible = "hisilicon,hns-dsaf-v1";
mode = "6port-16rss";
interrupt-parent = <&mbigen_dsa>;
reg = <0x0 0xc5000000 0x0 0x890000
0x0 0xc7000000 0x0 0x60000>;
reg-names = "ppe-base", "dsaf-base";
subctrl-syscon = <&subctrl>;
reset-field-offset = 0;
interrupts = <131 4>,<132 4>, <133 4>,<134 4>,
<135 4>,<136 4>, <137 4>,<138 4>,
<139 4>,<140 4>, <141 4>,<142 4>,
<143 4>,<144 4>, <145 4>,<146 4>,
<147 4>,<148 4>, <384 1>,<385 1>,
<386 1>,<387 1>, <388 1>,<389 1>,
<390 1>,<391 1>,
buf-size = <4096>;
desc-num = <1024>;
dma-coherent;
port@0 {
reg = 0;
phy-handle = <&phy0>;
serdes-syscon = <&serdes>;
mc-mac-mask = [ff f0 00 00 00 00];
};
port@1 {
reg = 1;
serdes-syscon = <&serdes>;
mc-mac-mask = [ff f0 00 00 00 00];
};
};
@@ -1,27 +0,0 @@
Hisilicon MDIO bus controller
Properties:
- compatible: can be one of:
"hisilicon,hns-mdio"
"hisilicon,mdio"
"hisilicon,hns-mdio" is recommended to be used for hip05 and later SOCs,
while "hisilicon,mdio" is optional for backwards compatibility only on
hip04 Soc.
- reg: The base address of the MDIO bus controller register bank.
- #address-cells: Must be <1>.
- #size-cells: Must be <0>. MDIO addresses have no size component.
Typically an MDIO bus might have several children.
Example:
mdio@803c0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "hisilicon,hns-mdio","hisilicon,mdio";
reg = <0x0 0x803c0000 0x0 0x10000>;
ethernet-phy@0 {
...
reg = <0>;
};
};
@@ -1,76 +0,0 @@
Hisilicon Network Subsystem NIC controller
Required properties:
- compatible: "hisilicon,hns-nic-v1" or "hisilicon,hns-nic-v2".
"hisilicon,hns-nic-v1" is for hip05.
"hisilicon,hns-nic-v2" is for Hi1610 and Hi1612.
- ae-handle: accelerator engine handle for hns,
specifies a reference to the associating hardware driver node.
see Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
- port-id: is the index of port provided by DSAF (the accelerator). DSAF can
connect to 8 PHYs. Port 0 to 1 are both used for administration purpose. They
are called debug ports.
The remaining 6 PHYs are taken according to the mode of DSAF.
In NIC mode of DSAF, all 6 PHYs are taken as ethernet ports to the CPU. The
port-id can be 2 to 7. Here is the diagram:
+-----+---------------+
| CPU |
+-+-+-+---+-+-+-+-+-+-+
| | | | | | | |
debug service
port port
(0,1) (2-7)
In Switch mode of DSAF, all 6 PHYs are taken as physical ports connect to a
LAN Switch while the CPU side assume itself have one single NIC connect to
this switch. In this case, the port-id will be 2 only.
+-----+---------------+
| CPU |
+-+-+-+---+-+-+-+-+-+-+
| | service| port(2)
debug +------------+
port | switch |
(0,1) +-+-+-+-+-+-++
| | | | | |
external port
This attribute is remained for compatible purpose. It is not recommended to
use it in new code.
- port-idx-in-ae: is the index of port provided by AE.
In NIC mode of DSAF, all 6 PHYs of service DSAF are taken as ethernet ports
to the CPU. The port-idx-in-ae can be 0 to 5. Here is the diagram:
+-----+---------------+
| CPU |
+-+-+-+---+-+-+-+-+-+-+
| | | | | | | |
debug debug service
port port port
(0) (0) (0-5)
In Switch mode of DSAF, all 6 PHYs of service DSAF are taken as physical
ports connected to a LAN Switch while the CPU side assume itself have one
single NIC connected to this switch. In this case, the port-idx-in-ae
will be 0 only.
+-----+-----+------+------+
| CPU |
+-+-+-+-+-+-+-+-+-+-+-+-+-+
| | service| port(0)
debug debug +------------+
port port | switch |
(0) (0) +-+-+-+-+-+-++
| | | | | |
external port
- local-mac-address: mac addr of the ethernet interface
Example:
ethernet@0{
compatible = "hisilicon,hns-nic-v1";
ae-handle = <&dsaf0>;
port-idx-in-ae = <0>;
local-mac-address = [a2 14 e4 4b 56 76];
};
@@ -47,6 +47,9 @@ properties:
interrupt-names:
const: macirq
power-domains:
maxItems: 1
required:
- compatible
- clocks
@@ -91,9 +94,9 @@ examples:
snps,tx-queues-to-use = <2>;
snps,tx-sched-wrr;
queue0 {
snps,weight = <0x10>;
snps,dcb-algorithm;
snps,priority = <0x0>;
snps,weight = <0x10>;
snps,dcb-algorithm;
snps,priority = <0x0>;
};
queue1 {
@@ -66,6 +66,9 @@ properties:
- mii
- rgmii-id
power-domains:
maxItems: 1
required:
- compatible
- reg
@@ -65,6 +65,9 @@ properties:
- mii
- rmii
power-domains:
maxItems: 1
required:
- compatible
- reg
@@ -45,13 +45,13 @@ examples:
};
mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qe_pio_a 11>,
<&qe_pio_c 6>;
ethphy0: ethernet-phy@0 {
reg = <0>;
};
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpios = <&qe_pio_a 11>,
<&qe_pio_c 6>;
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
...
@@ -63,6 +63,14 @@ properties:
minimum: 0
maximum: 3
micrel,rmii-reference-clock-select-25-mhz:
enum: [ 1 ]
description: |
RMII Reference Clock Select bit selects 25 MHz mode.
Setting the RMII Reference Clock Select bit enables 25 MHz rather
than 50 MHz clock mode.
allOf:
- $ref: ethernet-phy.yaml#
- if:
@@ -90,6 +98,18 @@ allOf:
then:
properties:
micrel,led-mode: false
- if:
not:
properties:
compatible:
contains:
enum:
- ethernet-phy-id0022.1555
- ethernet-phy-id0022.1556
- ethernet-phy-id0022.1560
then:
properties:
micrel,rmii-reference-clock-select-25-mhz: false
- if:
properties:
compatible:
@@ -105,13 +125,6 @@ allOf:
description:
The RMII reference input clock. Used to determine the XI input
clock.
micrel,rmii-reference-clock-select-25-mhz:
type: boolean
description: |
RMII Reference Clock Select bit selects 25 MHz mode
Setting the RMII Reference Clock Select bit enables 25 MHz rather
than 50 MHz clock mode.
dependentRequired:
micrel,rmii-reference-clock-select-25-mhz: [ clock-names ]
@@ -40,6 +40,11 @@ properties:
Event.
maxItems: 1
reset-gpios:
description:
GPIO connected to the active-low RESET_N pin of the MAC-PHY.
maxItems: 1
spi-max-frequency:
minimum: 15000000
maximum: 25000000
@@ -15,6 +15,7 @@ allOf:
properties:
compatible:
enum:
- ethernet-phy-id01e0.4281
- ethernet-phy-id4f51.e91a
- ethernet-phy-id4f51.e91b
@@ -197,10 +197,10 @@ examples:
<0x71040000 0x10000>,
<0x71050000 0x10000>,
<0x71060000 0x10000>;
reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
"port2", "port3", "port4", "port5", "port6",
"port7", "port8", "port9", "port10", "qsys",
"ana", "s0", "s1", "s2";
reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
"port2", "port3", "port4", "port5", "port6",
"port7", "port8", "port9", "port10", "qsys",
"ana", "s0", "s1", "s2";
ethernet-ports {
#address-cells = <1>;
@@ -69,6 +69,9 @@ properties:
items:
- const: stmmaceth
power-domains:
maxItems: 1
phy-mode:
enum:
- rmii
@@ -81,8 +81,9 @@ properties:
phy-mode:
contains:
enum:
- usxgmii
- 10gbase-kr
- 10gbase-r
- usxgmii
mdio:
$ref: mdio.yaml#
@@ -90,6 +91,9 @@ properties:
description:
Optional node for embedded MDIO controller.
allOf:
- $ref: snps,dwmac-common.yaml#
required:
- compatible
- reg
@@ -103,7 +107,7 @@ required:
- phy-handle
- phy-mode
additionalProperties: false
unevaluatedProperties: false
examples:
- |
@@ -83,6 +83,9 @@ properties:
description:
To select RMII reference clock from external.
power-domains:
maxItems: 1
required:
- compatible
- clocks
@@ -51,6 +51,9 @@ properties:
items:
- const: stmmaceth
power-domains:
maxItems: 1
required:
- compatible
- reg
@@ -81,6 +81,9 @@ properties:
- const: rx
- const: ptp_ref
power-domains:
maxItems: 1
required:
- clocks
- clock-names
@@ -0,0 +1,69 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/pcs/rockchip,rk3568-xpcs.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Rockchip RK3568 Synopsys DesignWare Ethernet PCS
maintainers:
- Coia Prant <[email protected]>
description: |
Rockchip RK3568 SoC integrates a Synopsys DesignWare Ethernet Physical
Coding Sublayer (XPCS).
The PCS provides an interface between the Media Access Control (MAC)
and the Physical Medium Attachment (PMA) sublayer through a Media
Independent Interface (GMII).
The XPCS is accessed over the APB3 bus and internally connected to a
Naneng Combo SerDes PHY.
It supports 1000BASE-X, SGMII and QSGMII modes.
properties:
compatible:
const: rockchip,rk3568-xpcs
reg:
maxItems: 1
clocks:
items:
- description: APB3 bus interface clock (clk_csr_i), required for register access
- description: EEE clock (clk_eee_i), required for Energy Efficient Ethernet operation
clock-names:
items:
- const: csr
- const: eee
phys:
maxItems: 1
power-domains:
maxItems: 1
required:
- compatible
- reg
- clocks
- clock-names
- phys
- power-domains
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/rk3568-cru.h>
#include <dt-bindings/power/rk3568-power.h>
#include <dt-bindings/phy/phy.h>
ethernet-pcs@fda00000 {
compatible = "rockchip,rk3568-xpcs";
reg = <0xfda00000 0x200000>;
clocks = <&cru PCLK_XPCS>, <&cru CLK_XPCS_EEE>;
clock-names = "csr", "eee";
phys = <&combphy2 PHY_TYPE_SGMII>;
power-domains = <&power RK3568_PD_PIPE>;
};
@@ -54,6 +54,12 @@ properties:
- zyxel,gs1920-24hp-v2-pse
- const: realtek,pse-mcu-gen1-smbus
# I2C, raw framing
- items:
- enum:
- ubnt,usw-lite-16-poe-pse
- const: realtek,pse-mcu-gen1-i2c
# UART
- items:
- enum:
@@ -100,6 +106,7 @@ allOf:
contains:
enum:
- realtek,pse-mcu-gen1-smbus
- realtek,pse-mcu-gen1-i2c
- realtek,pse-mcu-gen2-smbus
- realtek,pse-mcu-gen2-i2c
then:
@@ -86,6 +86,9 @@ properties:
phy-names:
const: serdes
power-domains:
maxItems: 1
required:
- compatible
- clocks
@@ -246,14 +246,14 @@ examples:
qcom,remote-pid = <5>;
ipa_smp2p_out: ipa-ap-to-modem {
qcom,entry-name = "ipa";
#qcom,smem-state-cells = <1>;
qcom,entry-name = "ipa";
#qcom,smem-state-cells = <1>;
};
ipa_smp2p_in: ipa-modem-to-ap {
qcom,entry-name = "ipa";
interrupt-controller;
#interrupt-cells = <2>;
qcom,entry-name = "ipa";
interrupt-controller;
#interrupt-cells = <2>;
};
};
@@ -74,9 +74,14 @@ description: |
+------->| QCA8075 PHY | | PHY4 | | PHY5 |
(clock) +-------------------------------------+ +-------+ +-------+
The IPQ5424 PPE reuses the same switch core, but wires up only 3
front panel ports (GMAC0-2) and the single EDMA FIFO interface; it
has no EIP FIFO and no ports 4-6.
properties:
compatible:
enum:
- qcom,ipq5424-ppe
- qcom,ipq9574-ppe
reg:
@@ -105,24 +110,16 @@ properties:
description: PPE switch miscellaneous interrupt
interconnects:
items:
- description: Bus interconnect path leading to PPE switch core function
- description: Bus interconnect path leading to PPE register access
- description: Bus interconnect path leading to QoS generation
- description: Bus interconnect path leading to timeout reference
- description: Bus interconnect path leading to NSS NOC from memory NOC
- description: Bus interconnect path leading to memory NOC from NSS NOC
- description: Bus interconnect path leading to enhanced memory NOC from NSS NOC
minItems: 5
maxItems: 7
description:
The number of interconnect paths depends on compatible, 5 paths for
qcom,ipq5424-ppe and 7 paths for qcom,ipq9574-ppe, enumerated in the
allOf conditionals below.
interconnect-names:
items:
- const: ppe
- const: ppe_cfg
- const: qos_gen
- const: timeout_ref
- const: nssnoc_memnoc
- const: memnoc_nssnoc
- const: memnoc_nssnoc_1
minItems: 5
maxItems: 7
ethernet-dma:
type: object
@@ -144,8 +141,14 @@ properties:
- const: apb
resets:
maxItems: 1
description: EDMA reset
items:
- description: EDMA system reset
- description: EDMA APB reset
reset-names:
items:
- const: sys
- const: apb
interrupts:
minItems: 65
@@ -170,12 +173,13 @@ properties:
- clocks
- clock-names
- resets
- reset-names
- interrupts
- interrupt-names
ethernet-ports:
patternProperties:
"^ethernet-port@[1-6]+$":
"^ethernet-port@[0-9a-f]+$":
type: object
unevaluatedProperties: false
$ref: ethernet-switch-port.yaml#
@@ -229,6 +233,61 @@ required:
allOf:
- $ref: ethernet-switch.yaml
- if:
properties:
compatible:
contains:
const: qcom,ipq9574-ppe
then:
properties:
interconnects:
items:
- description: Bus interconnect path leading to PPE switch core function
- description: Bus interconnect path leading to PPE register access
- description: Bus interconnect path leading to QoS generation
- description: Bus interconnect path leading to timeout reference
- description: Bus interconnect path leading to NSS NOC from memory NOC
- description: Bus interconnect path leading to memory NOC from NSS NOC
- description: Bus interconnect path leading to enhanced memory NOC from NSS NOC
interconnect-names:
items:
- const: ppe
- const: ppe_cfg
- const: qos_gen
- const: timeout_ref
- const: nssnoc_memnoc
- const: memnoc_nssnoc
- const: memnoc_nssnoc_1
- if:
properties:
compatible:
contains:
const: qcom,ipq5424-ppe
then:
properties:
interconnects:
items:
- description: Bus interconnect path leading to PPE switch core function
- description: Bus interconnect path leading to PPE register access
- description: Bus interconnect path leading to CE AXI
- description: Bus interconnect path leading to CE APB
- description: Bus interconnect path leading to NSS CSR access
interconnect-names:
items:
- const: ppe
- const: ppe_cfg
- const: nssnoc_ce_axi
- const: nssnoc_ce_apb
- const: nssnoc_nss_csr
ethernet-ports:
patternProperties:
"^ethernet-port@[0-9a-f]+$":
properties:
reg:
maximum: 3
unevaluatedProperties: false
@@ -273,7 +332,10 @@ examples:
<&nsscc NSS_CC_PPE_EDMA_CFG_CLK>;
clock-names = "sys",
"apb";
resets = <&nsscc EDMA_HW_RESET>;
resets = <&nsscc PPE_EDMA_ARES>,
<&nsscc PPE_EDMA_CFG_ARES>;
reset-names = "sys",
"apb";
interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
@@ -0,0 +1,107 @@
# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/qcom,sa8255p-ethqos.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Ethernet ETHQOS device (firmware managed)
maintainers:
- Bjorn Andersson <[email protected]>
- Konrad Dybcio <[email protected]>
- Bartosz Golaszewski <[email protected]>
description:
dwmac based Qualcomm ethernet devices which support Gigabit
ethernet (version v2.3.0 and onwards) with clocks, interconnects, etc.
managed by firmware
allOf:
- $ref: snps,dwmac.yaml#
properties:
compatible:
const: qcom,sa8255p-ethqos
reg:
maxItems: 2
reg-names:
items:
- const: stmmaceth
- const: rgmii
interrupts:
items:
- description: Combined signal for various interrupt events
- description: The interrupt that occurs when HW safety error triggered
interrupt-names:
items:
- const: macirq
- const: sfty
power-domains:
minItems: 2
maxItems: 2
power-domain-names:
items:
- const: core
- const: mdio
phys:
maxItems: 1
phy-names:
items:
- const: serdes
iommus:
maxItems: 1
dma-coherent: true
required:
- compatible
- reg-names
- power-domains
- power-domain-names
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
ethernet: ethernet@23040000 {
compatible = "qcom,sa8255p-ethqos";
reg = <0x23040000 0x10000>,
<0x23056000 0x100>;
reg-names = "stmmaceth", "rgmii";
iommus = <&apps_smmu 0x120 0x7>;
interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq", "sfty";
dma-coherent;
snps,tso;
snps,pbl = <32>;
rx-fifo-depth = <16384>;
tx-fifo-depth = <16384>;
phy-handle = <&ethernet_phy>;
phy-mode = "2500base-x";
snps,mtl-rx-config = <&mtl_rx_setup1>;
snps,mtl-tx-config = <&mtl_tx_setup1>;
power-domains = <&scmi8_pd 0>, <&scmi8_pd 1>;
power-domain-names = "core", "mdio";
phys = <&serdes1>;
phy-names = "serdes";
};
@@ -0,0 +1,332 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/realtek,rtl8224-package.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Realtek RTL8224 Ethernet PHY package
maintainers:
- Andrew Lunn <[email protected]>
- Florian Fainelli <[email protected]>
- Heiner Kallweit <[email protected]>
description:
The RTL8224 is a four-port 2.5Gbps Ethernet PHY. Its PHYs occupy four
consecutive MDIO addresses and share package-wide configuration registers.
A package node is required when the first PHY's MDIO address is not a
multiple of four. Existing aligned layouts without a package node remain
supported.
The package reg must identify the first physical PHY's MDIO address,
even if that PHY has no child node. Each child PHY reg is its absolute
MDIO address, not an offset from the package base. Unused PHY ports may
be omitted. The base address must not exceed 28, so that all four PHY
addresses fit within the MDIO address space.
The enet-phy-pair-order and enet-phy-pair-polarity properties belong
to the individual PHY nodes and describe each port's MDI wiring.
$ref: ethernet-phy-package.yaml#
properties:
compatible:
const: realtek,rtl8224-package
reg:
maximum: 28
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
$ref: ethernet-phy.yaml#
properties:
compatible:
const: ethernet-phy-ieee802.3-c45
leds: false
required:
- compatible
unevaluatedProperties: false
required:
- compatible
# Enumerate the ranges because child addresses depend on the package base.
allOf:
- if:
properties:
reg: { const: 0 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 0, maximum: 3 }
- if:
properties:
reg: { const: 1 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 1, maximum: 4 }
- if:
properties:
reg: { const: 2 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 2, maximum: 5 }
- if:
properties:
reg: { const: 3 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 3, maximum: 6 }
- if:
properties:
reg: { const: 4 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 4, maximum: 7 }
- if:
properties:
reg: { const: 5 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 5, maximum: 8 }
- if:
properties:
reg: { const: 6 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 6, maximum: 9 }
- if:
properties:
reg: { const: 7 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 7, maximum: 10 }
- if:
properties:
reg: { const: 8 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 8, maximum: 11 }
- if:
properties:
reg: { const: 9 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 9, maximum: 12 }
- if:
properties:
reg: { const: 10 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 10, maximum: 13 }
- if:
properties:
reg: { const: 11 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 11, maximum: 14 }
- if:
properties:
reg: { const: 12 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 12, maximum: 15 }
- if:
properties:
reg: { const: 13 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 13, maximum: 16 }
- if:
properties:
reg: { const: 14 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 14, maximum: 17 }
- if:
properties:
reg: { const: 15 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 15, maximum: 18 }
- if:
properties:
reg: { const: 16 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 16, maximum: 19 }
- if:
properties:
reg: { const: 17 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 17, maximum: 20 }
- if:
properties:
reg: { const: 18 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 18, maximum: 21 }
- if:
properties:
reg: { const: 19 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 19, maximum: 22 }
- if:
properties:
reg: { const: 20 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 20, maximum: 23 }
- if:
properties:
reg: { const: 21 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 21, maximum: 24 }
- if:
properties:
reg: { const: 22 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 22, maximum: 25 }
- if:
properties:
reg: { const: 23 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 23, maximum: 26 }
- if:
properties:
reg: { const: 24 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 24, maximum: 27 }
- if:
properties:
reg: { const: 25 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 25, maximum: 28 }
- if:
properties:
reg: { const: 26 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 26, maximum: 29 }
- if:
properties:
reg: { const: 27 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 27, maximum: 30 }
- if:
properties:
reg: { const: 28 }
then:
patternProperties:
"^ethernet-phy@[a-f0-9]+$":
properties:
reg: { minimum: 28, maximum: 31 }
unevaluatedProperties: false
examples:
- |
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethernet-phy-package@1 {
compatible = "realtek,rtl8224-package";
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <1>;
enet-phy-pair-order = <0>;
};
ethernet-phy@2 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <2>;
enet-phy-pair-order = <0>;
};
ethernet-phy@3 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <3>;
enet-phy-pair-order = <1>;
};
ethernet-phy@4 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <4>;
enet-phy-pair-order = <1>;
enet-phy-pair-polarity = <0x1>;
};
};
};
@@ -91,8 +91,8 @@ examples:
#size-cells = <0>;
ethphy1: ethernet-phy@1 {
reg = <1>;
realtek,clkout-disable;
realtek,aldps-enable;
reg = <1>;
realtek,clkout-disable;
realtek,aldps-enable;
};
};
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/net/realtek,rtl9301-mdio.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Realtek RTL9300 MDIO Controller
title: Realtek Otto Switches Ethernet MDIO Controller
maintainers:
- Chris Packham <[email protected]>
@@ -12,6 +12,16 @@ maintainers:
properties:
compatible:
oneOf:
- items:
- enum:
- realtek,rtl8381-mdio
- realtek,rtl8382-mdio
- const: realtek,rtl8380-mdio
- items:
- enum:
- realtek,rtl8392-mdio
- realtek,rtl8393-mdio
- const: realtek,rtl8391-mdio
- items:
- enum:
- realtek,rtl9302b-mdio
@@ -24,6 +34,8 @@ properties:
- realtek,rtl9313-mdio
- const: realtek,rtl9311-mdio
- enum:
- realtek,rtl8380-mdio
- realtek,rtl8391-mdio
- realtek,rtl9301-mdio
- realtek,rtl9311-mdio
@@ -59,6 +71,68 @@ required:
- compatible
- reg
allOf:
- if:
properties:
compatible:
contains:
enum:
- realtek,rtl8380-mdio
- realtek,rtl8381-mdio
- realtek,rtl8382-mdio
then:
properties:
mdio-bus@0:
properties:
clock-frequency:
enum: [2500000, 10000000]
default: 2500000
patternProperties:
'^mdio-bus@[1-3]$': false
- if:
properties:
compatible:
contains:
enum:
- realtek,rtl8391-mdio
- realtek,rtl8392-mdio
- realtek,rtl8393-mdio
then:
patternProperties:
'^mdio-bus@[01]$':
properties:
clock-frequency:
enum: [1250000, 2500000, 5000000]
description: |
RTL839x has one clock selector shared by both MDIO buses. All explicitly
specified clock-frequency values must be identical. A bus without this
property inherits the shared frequency selected by another available bus.
If neither available bus specifies a frequency, 2500000 Hz is used.
'^mdio-bus@[2-3]$': false
- if:
properties:
compatible:
contains:
enum:
- realtek,rtl9301-mdio
- realtek,rtl9302b-mdio
- realtek,rtl9302c-mdio
- realtek,rtl9303-mdio
- realtek,rtl9311-mdio
- realtek,rtl9312-mdio
- realtek,rtl9313-mdio
then:
patternProperties:
'^mdio-bus@[0-3]$':
properties:
clock-frequency:
enum: [1250000, 2500000, 5000000]
default: 2500000
unevaluatedProperties: false
examples:
@@ -97,6 +97,8 @@ properties:
phy-handle: true
ptp-timer: true
'#address-cells':
description: Number of address cells for the MDIO bus.
const: 1
@@ -305,6 +307,15 @@ allOf:
items:
- const: fck
- const: refclk
- if:
not:
properties:
compatible:
contains:
const: renesas,etheravb-rcar-gen4
then:
properties:
ptp-timer: false
additionalProperties: false
@@ -44,6 +44,9 @@ properties:
phandle pointing to a PCS sub-node compatible with
renesas,rzn1-miic.yaml#
power-domains:
maxItems: 1
required:
- compatible
@@ -154,6 +154,9 @@ properties:
Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml#
(Refer RZ/T2H portion in the DT-binding file)
power-domains:
maxItems: 1
required:
- compatible
- reg
@@ -120,9 +120,18 @@ properties:
maximum: 0x7F
default: 0x10
pcs-handle:
description:
Specifies a reference to a node representing the PCS device
connected to this GMAC. Required when phy-mode is "sgmii".
maxItems: 1
phy-supply:
description: PHY regulator
power-domains:
maxItems: 1
required:
- compatible
- clocks
@@ -159,6 +168,27 @@ allOf:
clocks:
minItems: 5
- if:
properties:
compatible:
contains:
const: rockchip,rk3568-gmac
then:
required:
- phy-mode
- if:
properties:
compatible:
contains:
const: rockchip,rk3568-gmac
phy-mode:
contains:
const: sgmii
then:
required:
- pcs-handle
unevaluatedProperties: false
examples:
@@ -0,0 +1,66 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/snps,dwmac-common.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Synopsys DesignWare MAC common properties
maintainers:
- Alexandre Torgue <[email protected]>
- Giuseppe Cavallaro <[email protected]>
- Jose Abreu <[email protected]>
properties:
stmmac-axi-config:
type: object
unevaluatedProperties: false
description:
AXI BUS Mode parameters.
properties:
snps,lpi_en:
$ref: /schemas/types.yaml#/definitions/flag
description:
enable Low Power Interface
snps,xit_frm:
$ref: /schemas/types.yaml#/definitions/flag
description:
unlock on WoL
snps,wr_osr_lmt:
$ref: /schemas/types.yaml#/definitions/uint32
description:
max write outstanding req. limit
snps,rd_osr_lmt:
$ref: /schemas/types.yaml#/definitions/uint32
description:
max read outstanding req. limit
snps,blen:
$ref: /schemas/types.yaml#/definitions/uint32-array
description:
this is a vector of supported burst length.
minItems: 7
maxItems: 7
snps,fb:
$ref: /schemas/types.yaml#/definitions/flag
description:
fixed-burst
snps,axi-config:
$ref: /schemas/types.yaml#/definitions/phandle
description:
AXI BUS Mode parameters. Phandle to a node that can contain the
following properties
* snps,lpi_en, enable Low Power Interface
* snps,xit_frm, unlock on WoL
* snps,wr_osr_lmt, max write outstanding req. limit
* snps,rd_osr_lmt, max read outstanding req. limit
* snps,blen, this is a vector of supported burst length.
* snps,fb, fixed-burst
additionalProperties: true
@@ -57,6 +57,7 @@ properties:
- allwinner,sun8i-r40-gmac
- allwinner,sun8i-v3s-emac
- allwinner,sun50i-a64-emac
- allwinner,sun50i-h616-emac1
- amlogic,meson6-dwmac
- amlogic,meson8b-dwmac
- amlogic,meson8m2-dwmac
@@ -72,6 +73,7 @@ properties:
- nuvoton,ma35d1-dwmac
- nxp,s32g2-dwmac
- qcom,qcs404-ethqos
- qcom,sa8255p-ethqos
- qcom,sa8775p-ethqos
- qcom,sc8280xp-ethqos
- qcom,sm8150-ethqos
@@ -119,6 +121,7 @@ properties:
- starfive,jh7110-dwmac
- tesla,fsd-ethqos
- thead,th1520-gmac
- ultrarisc,dp1000-gmac
reg:
minItems: 1
@@ -174,7 +177,7 @@ properties:
minItems: 1
items:
- description: GMAC stmmaceth reset
- description: AHB reset
- description: AHB or OCP reset
reset-names:
oneOf:
@@ -182,10 +185,11 @@ properties:
- enum: [stmmaceth, ahb]
- items:
- const: stmmaceth
- const: ahb
- enum: [ahb, stmmaceth-ocp]
power-domains:
maxItems: 1
minItems: 1
maxItems: 2
mac-mode:
$ref: ethernet-controller.yaml#/properties/phy-connection-type
@@ -195,18 +199,6 @@ properties:
can be passive (no SW requirement), and requires that the MAC operate
in a different mode than the PHY in order to function.
snps,axi-config:
$ref: /schemas/types.yaml#/definitions/phandle
description:
AXI BUS Mode parameters. Phandle to a node that can contain the
following properties
* snps,lpi_en, enable Low Power Interface
* snps,xit_frm, unlock on WoL
* snps,wr_osr_lmt, max write outstanding req. limit
* snps,rd_osr_lmt, max read outstanding req. limit
* snps,blen, this is a vector of supported burst length.
* snps,fb, fixed-burst
snps,mtl-rx-config:
$ref: /schemas/types.yaml#/definitions/phandle
description:
@@ -558,45 +550,6 @@ properties:
required:
- compatible
stmmac-axi-config:
type: object
unevaluatedProperties: false
description:
AXI BUS Mode parameters.
properties:
snps,lpi_en:
$ref: /schemas/types.yaml#/definitions/flag
description:
enable Low Power Interface
snps,xit_frm:
$ref: /schemas/types.yaml#/definitions/flag
description:
unlock on WoL
snps,wr_osr_lmt:
$ref: /schemas/types.yaml#/definitions/uint32
description:
max write outstanding req. limit
snps,rd_osr_lmt:
$ref: /schemas/types.yaml#/definitions/uint32
description:
max read outstanding req. limit
snps,blen:
$ref: /schemas/types.yaml#/definitions/uint32-array
description:
this is a vector of supported burst length.
minItems: 7
maxItems: 7
snps,fb:
$ref: /schemas/types.yaml#/definitions/flag
description:
fixed-burst
required:
- compatible
- reg
@@ -610,6 +563,7 @@ dependencies:
allOf:
- $ref: ethernet-controller.yaml#
- $ref: snps,dwmac-common.yaml#
- if:
properties:
compatible:
@@ -622,6 +576,7 @@ allOf:
- allwinner,sun8i-r40-gmac
- allwinner,sun8i-v3s-emac
- allwinner,sun50i-a64-emac
- allwinner,sun50i-h616-emac1
- loongson,ls2k-dwmac
- loongson,ls7a-dwmac
- ingenic,jz4775-mac
@@ -630,6 +585,7 @@ allOf:
- ingenic,x1830-mac
- ingenic,x2000-mac
- qcom,qcs404-ethqos
- qcom,sa8255p-ethqos
- qcom,sa8775p-ethqos
- qcom,sc8280xp-ethqos
- qcom,sm8150-ethqos
@@ -121,22 +121,22 @@ examples:
- |
ether: ethernet@65000000 {
compatible = "socionext,uniphier-ld20-ave4";
reg = <0x65000000 0x8500>;
interrupts = <0 66 4>;
phy-mode = "rgmii";
phy-handle = <&ethphy>;
clock-names = "ether";
clocks = <&sys_clk 6>;
reset-names = "ether";
resets = <&sys_rst 6>;
socionext,syscon-phy-mode = <&soc_glue 0>;
reg = <0x65000000 0x8500>;
interrupts = <0 66 4>;
phy-mode = "rgmii";
phy-handle = <&ethphy>;
clock-names = "ether";
clocks = <&sys_clk 6>;
reset-names = "ether";
resets = <&sys_rst 6>;
socionext,syscon-phy-mode = <&soc_glue 0>;
mdio {
#address-cells = <1>;
#size-cells = <0>;
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy: ethernet-phy@1 {
reg = <1>;
};
};
ethphy: ethernet-phy@1 {
reg = <1>;
};
};
};
@@ -49,6 +49,9 @@ properties:
reset-names:
const: stmmaceth
power-domains:
maxItems: 1
required:
- compatible
- reg
@@ -52,6 +52,9 @@ properties:
interrupt-names:
maxItems: 1
power-domains:
maxItems: 1
resets:
maxItems: 1
@@ -56,6 +56,9 @@ properties:
reset-names:
const: stmmaceth
power-domains:
maxItems: 1
spacemit,apmu:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
@@ -75,6 +75,9 @@ properties:
The argument one is the offset of phy mode selection, the
argument two is the shift of phy mode selection.
power-domains:
maxItems: 1
required:
- compatible
- reg
@@ -121,6 +121,9 @@ properties:
minItems: 1
maxItems: 2
power-domains:
maxItems: 1
required:
- compatible
- clocks
@@ -67,6 +67,9 @@ properties:
- rgmii-rxid
- rgmii-txid
power-domains:
maxItems: 1
required:
- compatible
- reg
@@ -78,6 +78,9 @@ properties:
items:
- const: macirq
power-domains:
maxItems: 1
required:
- clocks
- clock-names
@@ -192,50 +192,50 @@ examples:
interrupt-names = "rx_thresh", "rx", "tx", "misc";
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
#address-cells = <1>;
#size-cells = <0>;
cpsw_port1: port@1 {
reg = <1>;
label = "port1";
mac-address = [ 00 00 00 00 00 00 ];
phys = <&phy_gmii_sel 1>;
phy-handle = <&ethphy0_sw>;
phy-mode = "rgmii";
ti,dual-emac-pvid = <1>;
};
cpsw_port1: port@1 {
reg = <1>;
label = "port1";
mac-address = [ 00 00 00 00 00 00 ];
phys = <&phy_gmii_sel 1>;
phy-handle = <&ethphy0_sw>;
phy-mode = "rgmii";
ti,dual-emac-pvid = <1>;
};
cpsw_port2: port@2 {
reg = <2>;
label = "wan";
mac-address = [ 00 00 00 00 00 00 ];
phys = <&phy_gmii_sel 2>;
phy-handle = <&ethphy1_sw>;
phy-mode = "rgmii";
ti,dual-emac-pvid = <2>;
};
cpsw_port2: port@2 {
reg = <2>;
label = "wan";
mac-address = [ 00 00 00 00 00 00 ];
phys = <&phy_gmii_sel 2>;
phy-handle = <&ethphy1_sw>;
phy-mode = "rgmii";
ti,dual-emac-pvid = <2>;
};
};
davinci_mdio_sw: mdio@1000 {
compatible = "ti,cpsw-mdio","ti,davinci_mdio";
reg = <0x1000 0x100>;
clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <0>;
bus_freq = <1000000>;
compatible = "ti,cpsw-mdio","ti,davinci_mdio";
reg = <0x1000 0x100>;
clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <0>;
bus_freq = <1000000>;
ethphy0_sw: ethernet-phy@0 {
reg = <0>;
};
ethphy0_sw: ethernet-phy@0 {
reg = <0>;
};
ethphy1_sw: ethernet-phy@1 {
reg = <1>;
};
ethphy1_sw: ethernet-phy@1 {
reg = <1>;
};
};
cpts {
clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
clock-names = "cpts";
clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
clock-names = "cpts";
};
};
@@ -48,6 +48,9 @@ properties:
interrupt-names:
const: macirq
power-domains:
maxItems: 1
required:
- compatible
- reg
@@ -0,0 +1,74 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/ultrarisc,dp1000-gmac.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: UltraRISC DP1000 DWMAC Ethernet controller
maintainers:
- Jia Wang <[email protected]>
description:
The DP1000 integrates a Synopsys DesignWare GMAC controller from the
5.20 series. The SoC integration adds fixed RGMII TX and RX clock delays
which cannot be disabled. Consequently, a functional RGMII link requires
a PCB without TX or RX clock delays, represented by "rgmii-id".
select:
properties:
compatible:
contains:
const: ultrarisc,dp1000-gmac
required:
- compatible
properties:
compatible:
items:
- const: ultrarisc,dp1000-gmac
- const: snps,dwmac-5.20
reg:
maxItems: 1
clocks:
maxItems: 1
clock-names:
const: stmmaceth
interrupts:
maxItems: 1
interrupt-names:
const: macirq
phy-mode:
const: rgmii-id
required:
- compatible
- reg
- clocks
- clock-names
- interrupts
- interrupt-names
- phy-mode
allOf:
- $ref: snps,dwmac.yaml#
unevaluatedProperties: false
examples:
- |
ethernet@38000000 {
compatible = "ultrarisc,dp1000-gmac", "snps,dwmac-5.20";
reg = <0x38000000 0x1000000>;
clocks = <&clk 0>;
clock-names = "stmmaceth";
interrupts = <84>;
interrupt-names = "macirq";
phy-mode = "rgmii-id";
};
@@ -59,6 +59,12 @@ properties:
description: Calibration data for sub-band 3 in the 5GHz band.
maxItems: 502
marvell,invalid-reg-hint-in-rom:
$ref: /schemas/types.yaml#/definitions/flag
description:
The regulatory hint in ROM conflicts with platform configuration.
It should be ignored, so the platform regulatory domain can be used.
marvell,wakeup-pin:
$ref: /schemas/types.yaml#/definitions/uint32
description:
@@ -325,22 +325,22 @@ examples:
r0 {
regdomain = "FCC";
txpower-5g {
b0 {
channels = <36 48>;
rates-ofdm = /bits/ 8 <23 23 23 23 23 23 23 23>;
rates-mcs = /bits/ 8 <1 23 23 23 23 23 23 23 23 23 23>,
/bits/ 8 <3 22 22 22 22 22 22 22 22 22 22>;
rates-ru = /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22 22 22>,
/bits/ 8 <4 20 20 20 20 20 20 20 20 20 20 20 20>;
};
b1 {
channels = <100 181>;
rates-ofdm = /bits/ 8 <14 14 14 14 14 14 14 14>;
rates-mcs = /bits/ 8 <4 14 14 14 14 14 14 14 14 14 14>;
txs-delta = <12 9 6>;
rates-ru = /bits/ 8 <7 14 14 14 14 14 14 14 14 14 14 14 14>;
};
};
b0 {
channels = <36 48>;
rates-ofdm = /bits/ 8 <23 23 23 23 23 23 23 23>;
rates-mcs = /bits/ 8 <1 23 23 23 23 23 23 23 23 23 23>,
/bits/ 8 <3 22 22 22 22 22 22 22 22 22 22>;
rates-ru = /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22 22 22>,
/bits/ 8 <4 20 20 20 20 20 20 20 20 20 20 20 20>;
};
b1 {
channels = <100 181>;
rates-ofdm = /bits/ 8 <14 14 14 14 14 14 14 14>;
rates-mcs = /bits/ 8 <4 14 14 14 14 14 14 14 14 14 14>;
txs-delta = <12 9 6>;
rates-ru = /bits/ 8 <7 14 14 14 14 14 14 14 14 14 14 14 14>;
};
};
};
};
};
@@ -92,6 +92,22 @@ properties:
ieee80211-freq-limit: true
nvmem-cells:
minItems: 1
maxItems: 3
description:
References to nvmem cells for MAC address and/or calibration data.
Supported cell names are mac-address, calibration, and pre-calibration.
nvmem-cell-names:
minItems: 1
maxItems: 3
items:
enum:
- mac-address
- calibration
- pre-calibration
qcom,calibration-data:
$ref: /schemas/types.yaml#/definitions/uint8-array
description:
@@ -408,4 +424,4 @@ examples:
"msi15",
"legacy";
ieee80211-freq-limit = <5470000 5875000>;
};
};
@@ -58,13 +58,6 @@ properties:
String to uniquely identify variant of the calibration data for designs
with colliding bus and device ids
qcom,ath12k-calibration-variant:
$ref: /schemas/types.yaml#/definitions/string
deprecated: true
description:
String to uniquely identify variant of the calibration data for designs
with colliding bus and device ids
qcom,wsi-controller:
$ref: /schemas/types.yaml#/definitions/flag
description:
@@ -50,6 +50,9 @@ properties:
used, this property is required. When SDIO is used, the "in-band"
interrupt provided by the SDIO bus is used unless an interrupt is defined
in the Device Tree.
The hardware suffers from a limitation when this property is used with
SDIO. OOB IRQ with SDIO should only be used for debug.
maxItems: 1
reset-gpios:
@@ -1,64 +0,0 @@
* Texas Instruments wl1251 wireless lan controller
The wl1251 chip can be connected via SPI or via SDIO. This
document describes the binding for the SPI connected chip.
Required properties:
- compatible : Should be "ti,wl1251"
- reg : Chip select address of device
- spi-max-frequency : Maximum SPI clocking speed of device in Hz
- interrupts : Should contain interrupt line
- vio-supply : phandle to regulator providing VIO
Optional properties:
- ti,wl1251-has-eeprom : boolean, the wl1251 has an eeprom connected, which
provides configuration data (calibration, MAC, ...)
- ti,power-gpio : GPIO connected to chip's PMEN pin if operated in
SPI mode
- Please consult Documentation/devicetree/bindings/spi/spi-bus.txt
for optional SPI connection related properties,
Examples:
&spi1 {
wl1251@0 {
compatible = "ti,wl1251";
reg = <0>;
spi-max-frequency = <48000000>;
spi-cpol;
spi-cpha;
interrupt-parent = <&gpio2>;
interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
vio-supply = <&vio>;
ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
};
};
&mmc3 {
vmmc-supply = <&wlan_en>;
bus-width = <4>;
non-removable;
ti,non-removable;
cap-power-off-card;
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins>;
#address-cells = <1>;
#size-cells = <0>;
wlan: wifi@1 {
compatible = "ti,wl1251";
reg = <1>;
interrupt-parent = <&gpio1>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_21 */
ti,wl1251-has-eeprom;
};
};
@@ -0,0 +1,85 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/wireless/ti,wl1251.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments WL1251 Wireless LAN Controller
maintainers:
- Eduard Bostina <[email protected]>
properties:
compatible:
const: ti,wl1251
reg:
maxItems: 1
interrupts:
maxItems: 1
vio-supply:
description:
Phandle to the regulator providing VIO. Required when connected via SPI.
ti,power-gpio:
maxItems: 1
description:
GPIO connected to chip's PMEN pin if operated in SPI mode.
ti,wl1251-has-eeprom:
type: boolean
description:
The wl1251 has an EEPROM connected, which provides configuration
data (calibration, MAC, ...).
clocks:
maxItems: 1
spi-max-frequency: true
spi-cpol: true
spi-cpha: true
required:
- compatible
- reg
- interrupts
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
spi {
#address-cells = <1>;
#size-cells = <0>;
wifi@0 {
compatible = "ti,wl1251";
reg = <0>;
spi-max-frequency = <48000000>;
spi-cpol;
spi-cpha;
interrupt-parent = <&gpio2>;
interrupts = <10 IRQ_TYPE_NONE>;
vio-supply = <&vio>;
ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};
};
- |
#include <dt-bindings/interrupt-controller/irq.h>
mmc {
#address-cells = <1>;
#size-cells = <0>;
wifi@1 {
compatible = "ti,wl1251";
reg = <1>;
interrupt-parent = <&gpio1>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
ti,wl1251-has-eeprom;
};
};
@@ -0,0 +1,88 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/wiznet,w5100.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Wiznet w5100/w5200/w5500 SPI Ethernet Controller
maintainers:
- Arthur Crepin Leblond <[email protected]>
description: |
This is a standalone 10/100 MBit Ethernet controller with SPI interface.
properties:
compatible:
enum:
- wiznet,w5100
- wiznet,w5200
- wiznet,w5500
interrupts:
minItems: 1
description:
The main interrupt (INT pin) is mandatory on all devices. The w5500
additionally supports an optional second interrupt for link status changes
(LINKLED pin). If it is not specified, link state changes will not be
reported.
items:
- description: Main interrupt (INT pin on the device).
- description:
Optional interrupt for link status changes (LINKLED pin on w5500).
reg:
maxItems: 1
spi-max-frequency:
description:
According to the datasheets, w5500 and w5200 allow a maximum of 80 MHz
while w5100 is reported by users to allow a maximum of 14 MHz. However,
board designs may need to limit this value.
maximum: 80000000
required:
- compatible
- reg
- interrupts
allOf:
- $ref: /schemas/net/ethernet-controller.yaml#
- $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
not:
properties:
compatible:
contains:
enum:
- wiznet,w5500
then:
properties:
interrupts:
maxItems: 1
unevaluatedProperties: false
examples:
- |
/* Example (for Raspberry Pi with pin control stuff for GPIO irq) */
#include <dt-bindings/interrupt-controller/irq.h>
spi {
#address-cells = <1>;
#size-cells = <0>;
ethernet@0 {
compatible = "wiznet,w5500";
reg = <0>;
interrupt-parent = <&gpio>;
interrupts = <25 IRQ_TYPE_LEVEL_LOW>,
<24 IRQ_TYPE_EDGE_BOTH>;
local-mac-address = [ a0 b0 c0 d0 e0 f0 ];
pinctrl-0 = <&eth1_pins>;
pinctrl-names = "default";
spi-max-frequency = <30000000>;
};
};
...
@@ -1,50 +0,0 @@
* Wiznet w5x00
This is a standalone 10/100 MBit Ethernet controller with SPI interface.
For each device connected to a SPI bus, define a child node within
the SPI master node.
Required properties:
- compatible: Should be one of the following strings:
"wiznet,w5100"
"wiznet,w5200"
"wiznet,w5500"
- reg: Specify the SPI chip select the chip is wired to.
- interrupts: Specify the interrupt index within the interrupt controller (referred
to above in interrupt-parent) and interrupt type. w5x00 natively
generates falling edge interrupts, however, additional board logic
might invert the signal.
- pinctrl-names: List of assigned state names, see pinctrl binding documentation.
- pinctrl-0: List of phandles to configure the GPIO pin used as interrupt line,
see also generic and your platform specific pinctrl binding
documentation.
Optional properties:
- spi-max-frequency: Maximum frequency of the SPI bus when accessing the w5500.
According to the w5500 datasheet, the chip allows a maximum of 80 MHz, however,
board designs may need to limit this value.
- local-mac-address: See ethernet.txt in the same directory.
Example (for Raspberry Pi with pin control stuff for GPIO irq):
&spi {
ethernet@0: w5500@0 {
compatible = "wiznet,w5500";
reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&eth1_pins>;
interrupt-parent = <&gpio>;
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
spi-max-frequency = <30000000>;
};
};
&gpio {
eth1_pins: eth1_pins {
brcm,pins = <25>;
brcm,function = <0>; /* in */
brcm,pull = <0>; /* none */
};
};
@@ -0,0 +1,170 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/x-powers,acx00-ephy-package.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: X-Powers AC200 and AC300 Ethernet PHY packages
maintainers:
- James Hilliard <[email protected]>
description:
The AC200 and AC300 contain compatible Fast Ethernet PHY blocks which report
the same Clause 22 PHY ID and use the same link-side register layout. The
package control paths differ. AC200 package control registers are accessed
through the companion IC's I2C register interface, while AC300 control
registers occupy a second Clause 22 address fixed at 16 plus the link PHY
address.
Systems with a known package use the corresponding AC200 or AC300 compatible.
Systems which can contain either package use the ACx00 compatible and a
packed NVMEM configuration field to select the backend at runtime.
The link PHY cannot report its ID until the package control sequence has
completed, so its child node supplies the documented PHY ID. The package and
child use the same base address. The AC200 driver programs that address into
the package, while the AC300 driver derives its control address from it.
properties:
compatible:
enum:
- x-powers,ac200-ephy-package
- x-powers,ac300-ephy-package
- x-powers,acx00-ephy-package
reg:
maximum: 31
clocks:
maxItems: 1
description: AC300 input clock, running at 24, 25, or 27 MHz
vcc-supply:
description:
3.3 V package supply. This is connected to EPHY_VCC on AC200 and VCC1
on AC300.
nvmem-cells:
maxItems: 1
description:
Packed little-endian EPHY configuration value, with the least-significant
byte first. Bits 3 through 0 contain the analog calibration code, bits 7
through 4 are reserved, bit 8 selects AC300 when set and AC200 when clear,
and bit 9 requests the AC300 low-calibration tuning sequence. Bits 15
through 10 are reserved.
AC300 and selectable ACx00 packages require the full configuration
field, including bits 8 and 9 even when their values are zero, returned
as two bytes. A fixed AC200 package may provide a one-byte calibration
value or a two-byte configuration with bit 8 clear, or omit the cell
and use its internal eFuse calibration copy.
nvmem-cell-names:
const: configuration
x-powers,ac200:
$ref: /schemas/types.yaml#/definitions/phandle
description:
Phandle to the AC200 companion IC described by the x-powers,ac200 MFD
binding. Its I2C interface provides access to the package control
registers used to power and configure the Ethernet PHY.
x-powers,xmii-rx-clock-inverted:
type: boolean
description:
Invert the xMII receive clock inside the PHY. This is required by some
SoC integrations, including the Allwinner H6 AC200 connection.
patternProperties:
^ethernet-phy@[a-f0-9]+$:
$ref: ethernet-phy.yaml#
properties:
compatible:
const: ethernet-phy-id0044.1400
required:
- compatible
unevaluatedProperties: false
required:
- compatible
- vcc-supply
dependentRequired:
nvmem-cells: [ nvmem-cell-names ]
allOf:
- $ref: ethernet-phy-package.yaml#
- if:
properties:
compatible:
const: x-powers,ac200-ephy-package
then:
properties:
clocks: false
required:
- x-powers,ac200
- if:
properties:
compatible:
const: x-powers,ac300-ephy-package
then:
properties:
x-powers,ac200: false
required:
- clocks
- nvmem-cells
- nvmem-cell-names
- if:
properties:
compatible:
const: x-powers,acx00-ephy-package
then:
required:
- clocks
- nvmem-cells
- nvmem-cell-names
- x-powers,ac200
- if:
properties:
compatible:
enum:
- x-powers,ac300-ephy-package
- x-powers,acx00-ephy-package
then:
properties:
reg:
maximum: 7
patternProperties:
^ethernet-phy@[a-f0-9]+$:
properties:
reg:
maximum: 7
unevaluatedProperties: false
examples:
- |
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethernet-phy-package@0 {
compatible = "x-powers,acx00-ephy-package";
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pwm 5>;
vcc-supply = <&reg_3v3>;
nvmem-cells = <&ephy_configuration>;
nvmem-cell-names = "configuration";
x-powers,ac200 = <&ac200>;
ethernet-phy@0 {
compatible = "ethernet-phy-id0044.1400";
reg = <0>;
};
};
};
...
+17 -14
View File
@@ -176,20 +176,23 @@ properties:
struct:
description: Name of the nested struct type.
type: string
if:
properties:
type:
const: pad
then:
required: [ len ]
if:
properties:
type:
const: binary
then:
oneOf:
- required: [ len ]
- required: [ struct ]
allOf:
-
if:
properties:
type:
const: pad
then:
required: [ len ]
-
if:
properties:
type:
const: binary
then:
oneOf:
- required: [ len ]
- required: [ struct ]
# End genetlink-legacy
attribute-sets:
+42 -18
View File
@@ -72,14 +72,14 @@ definitions:
type: enum
entries:
- none
- cloned
- closed
- cookie-wait
- cookie-echoed
- established
- shutdown-sent
- shutdown-received
- shutdown-recd
- shutdown-ack-sent
- shutdown-heartbeat-sent
- heartbeat-sent
-
name: nf-ct-status
type: flags
@@ -116,9 +116,11 @@ attribute-sets:
-
name: packets-old
type: u32
doc: obsolete
-
name: bytes-old
type: u32
doc: obsolete
-
name: pad
type: pad
@@ -292,6 +294,12 @@ attribute-sets:
name: help-name
type: string
doc: helper name
-
name: help-info
type: binary
doc: >-
Private data of a user space helper, only present for helpers
registered via nfnetlink_cthelper with a non-zero data length.
-
name: nat-proto-attrs
attributes:
@@ -314,16 +322,16 @@ attribute-sets:
name: nat-v4-maxip
type: u32
byte-order: big-endian
-
name: nat-proto
type: nest
nested-attributes: nat-proto-attrs
-
name: nat-v6-minip
type: binary
-
name: nat-v6-maxip
type: binary
-
name: nat-proto
type: nest
nested-attributes: nat-proto-attrs
-
name: seqadj-attrs
attributes:
@@ -345,6 +353,20 @@ attribute-sets:
-
name: secctx-name
type: string
-
name: timestamp-attrs
attributes:
-
name: start
type: u64
byte-order: big-endian
-
name: stop
type: u64
byte-order: big-endian
-
name: pad
type: pad
-
name: synproxy-attrs
attributes:
@@ -371,6 +393,12 @@ attribute-sets:
name: reply-flags
type: u32
doc: bitmask of tuple fields to filter on, reply direction
-
name: zone
type: flag
doc: >-
Filter on conntrack zone id; requires the top-level zone
(``CTA_ZONE``) attribute.
-
name: conntrack-attrs
attributes:
@@ -445,7 +473,7 @@ attribute-sets:
nested-attributes: seqadj-attrs
-
name: secmark
type: binary
type: u32
doc: obsolete
-
name: zone
@@ -458,8 +486,8 @@ attribute-sets:
nested-attributes: secctx-attrs
-
name: timestamp
type: u64
byte-order: big-endian
type: nest
nested-attributes: timestamp-attrs
-
name: mark-mask
type: u32
@@ -510,7 +538,7 @@ attribute-sets:
name: invalid
type: u32
byte-order: big-endian
doc: obsolete
doc: packets which could not be tracked
-
name: ignore
type: u32
@@ -582,20 +610,18 @@ operations:
- status
- protoinfo
- help
- nat-src
- nat-dst
- timeout
- mark
- counters-orig
- counters-reply
- use
- id
- nat-dst
- tuple-master
- seq-adj-orig
- seq-adj-reply
- zone
- secctx
- timestamp
- labels
- synproxy
dump:
@@ -618,20 +644,18 @@ operations:
- status
- protoinfo
- help
- nat-src
- nat-dst
- timeout
- mark
- counters-orig
- counters-reply
- use
- id
- nat-dst
- tuple-master
- seq-adj-orig
- seq-adj-reply
- zone
- secctx
- timestamp
- labels
- synproxy
-
@@ -645,8 +669,8 @@ operations:
reply:
value: 0x104
attributes:
- searched
- found
- invalid
- insert
- insert-failed
- drop
+155 -16
View File
@@ -158,7 +158,7 @@ definitions:
-
name: entry
-
type: enum
type: flags
name: resource-scope
entries:
-
@@ -174,6 +174,18 @@ definitions:
value: 1
-
name: fw-activate
-
type: enum
name: reload-limit
entries:
-
name: unspec
doc: no constraints
-
name: no-reset
doc: >-
No reset allowed, no down time allowed, no link flap and no
configuration is lost.
-
type: enum
name: param-cmode
@@ -775,7 +787,7 @@ attribute-sets:
-
name: reload-limits
type: bitfield32
enum: reload-action
enum: reload-limit
enum-as-flags: true
-
name: dev-stats
@@ -793,6 +805,7 @@ attribute-sets:
-
name: reload-stats-limit
type: u8
enum: reload-limit
-
name: reload-stats-value
type: u32
@@ -845,13 +858,14 @@ attribute-sets:
name: linecard-supported-types
type: nest
nested-attributes: dl-linecard-supported-types
# TODO: fill in the attributes in between
-
name: nested-devlink
type: nest
multi-attr: true
nested-attributes: dl-nested-devlink
-
name: selftests
type: nest
value: 176
nested-attributes: dl-selftest-id
-
name: rate-tx-priority
@@ -889,7 +903,6 @@ attribute-sets:
name: resource-scope-mask
type: u32
enum: resource-scope
enum-as-flags: true
doc: |
Bitmask selecting which resource classes to include in a
resource-dump response. Bit 0 (dev) selects device-level
@@ -898,7 +911,7 @@ attribute-sets:
-
name: parent-dev
type: nest
nested-attributes: dl-parent-dev
nested-attributes: dl-nested-devlink
doc: |
Identifies the devlink instance which owns the parent rate node.
Used with rate-set and rate-new to parent a rate object to a node on
@@ -978,6 +991,49 @@ attribute-sets:
type: bitfield32
enum: port-fn-attr-cap
enum-as-flags: true
-
name: devlink
type: nest
nested-attributes: dl-nested-devlink
doc: Handle of the peer devlink instance instantiated for this function.
-
name: max-io-eqs
type: u32
-
name: dl-port-function-set
subset-of: dl-port-function
doc: |
Port function attributes that can be configured; opstate and the
devlink handle are read-only.
attributes:
-
name: hw-addr
-
name: state
-
name: caps
-
name: max-io-eqs
-
name: dl-port-set
subset-of: devlink
doc: Attributes accepted by the port-set request.
attributes:
-
name: bus-name
-
name: dev-name
-
name: index
-
name: port-index
-
name: port-type
-
name: port-function
nested-attributes: dl-port-function-set
-
name: dl-dpipe-tables
@@ -1008,6 +1064,8 @@ attribute-sets:
name: dpipe-table-resource-id
-
name: dpipe-table-resource-units
-
name: pad
-
name: dl-dpipe-table-matches
@@ -1042,6 +1100,8 @@ attribute-sets:
name: dpipe-entry-action-values
-
name: dpipe-entry-counter
-
name: pad
-
name: dl-dpipe-entry-match-values
@@ -1180,6 +1240,8 @@ attribute-sets:
name: resource-unit
-
name: resource-occ
-
name: pad
-
name: dl-resource-list
@@ -1207,6 +1269,7 @@ attribute-sets:
attributes:
-
name: region-snapshot
multi-attr: true
-
name: dl-region-snapshot
@@ -1221,6 +1284,7 @@ attribute-sets:
attributes:
-
name: region-chunk
multi-attr: true
-
name: dl-region-chunk
@@ -1230,6 +1294,8 @@ attribute-sets:
name: region-chunk-data
-
name: region-chunk-addr
-
name: pad
-
name: dl-fmsg
@@ -1270,6 +1336,8 @@ attribute-sets:
name: health-reporter-auto-dump
-
name: health-reporter-burst-period
-
name: pad
-
name: dl-attr-stats
@@ -1284,6 +1352,10 @@ attribute-sets:
-
name: stats-rx-dropped
type: u64
-
name: pad
type: pad
value: 61
-
name: dl-trap-metadata
@@ -1303,6 +1375,7 @@ attribute-sets:
attributes:
-
name: linecard-type
multi-attr: true
-
name: dl-selftest-id
@@ -1330,6 +1403,10 @@ attribute-sets:
-
name: dl-parent-dev
subset-of: devlink
doc: |
Devlink handle accepted as the parent-dev input; the netns id the
kernel reports back is not accepted, the parent is always resolved
in the caller's netns.
attributes:
-
name: bus-name
@@ -1338,6 +1415,50 @@ attribute-sets:
-
name: index
-
name: dl-rate-set
subset-of: devlink
doc: Attributes accepted by the rate-set and rate-new requests.
attributes:
-
name: bus-name
-
name: dev-name
-
name: index
-
name: port-index
-
name: rate-node-name
-
name: rate-tx-share
-
name: rate-tx-max
-
name: rate-tx-priority
-
name: rate-tx-weight
-
name: rate-parent-node-name
-
name: rate-tc-bws
-
name: parent-dev
nested-attributes: dl-parent-dev
-
name: dl-nested-devlink
subset-of: devlink
attributes:
-
name: bus-name
-
name: dev-name
-
name: index
-
name: netns-id
operations:
enum-model: directional
list:
@@ -1363,6 +1484,7 @@ operations:
- index
- reload-failed
- dev-stats
- nested-devlink
dump:
reply: *get-reply
@@ -1388,13 +1510,12 @@ operations:
request:
attributes: *dev-id-attrs
reply:
value: 3 # due to a bug, port dump returns DEVLINK_CMD_NEW
attributes: *port-id-attrs
-
name: port-set
doc: Set devlink port instances.
attribute-set: devlink
attribute-set: dl-port-set
dont-validate: [strict]
flags: [admin-perm]
do:
@@ -1901,7 +2022,7 @@ operations:
post: devlink-nl-post-doit
request:
value: 42
attributes: &region-id-attrs
attributes:
- bus-name
- dev-name
- index
@@ -1909,7 +2030,15 @@ operations:
- region-name
reply: &region-get-reply
value: 42
attributes: *region-id-attrs
attributes:
- bus-name
- dev-name
- index
- port-index
- region-name
- region-size
- region-max-snapshots
- region-snapshots
dump:
request:
attributes: *dev-id-attrs
@@ -1975,6 +2104,7 @@ operations:
- index
- port-index
- region-name
- region-chunks
-
name: port-param-get
@@ -2305,7 +2435,7 @@ operations:
-
name: rate-set
doc: Set rate instances.
attribute-set: devlink
attribute-set: dl-rate-set
dont-validate: [strict]
flags: [admin-perm]
do:
@@ -2316,6 +2446,7 @@ operations:
- bus-name
- dev-name
- index
- port-index
- rate-node-name
- rate-tx-share
- rate-tx-max
@@ -2328,7 +2459,7 @@ operations:
-
name: rate-new
doc: Create rate instances.
attribute-set: devlink
attribute-set: dl-rate-set
dont-validate: [strict]
flags: [admin-perm]
do:
@@ -2374,14 +2505,22 @@ operations:
post: devlink-nl-post-doit
request:
value: 78
attributes: &linecard-id-attrs
attributes:
- bus-name
- dev-name
- index
- linecard-index
reply: &linecard-get-reply
value: 80
attributes: *linecard-id-attrs
attributes:
- bus-name
- dev-name
- index
- linecard-index
- linecard-state
- linecard-type
- linecard-supported-types
- nested-devlink
dump:
request:
attributes: *dev-id-attrs
+9 -13
View File
@@ -31,8 +31,7 @@ definitions:
-
name: unlocked
doc: |
dpll was not yet locked to any valid input (or forced by setting
DPLL_A_MODE to DPLL_MODE_DETACHED)
dpll was not yet locked to any valid input
value: 1
-
name: locked
@@ -550,6 +549,8 @@ attribute-sets:
attributes:
-
name: parent-id
-
name: pad
-
name: direction
-
@@ -576,6 +577,8 @@ attribute-sets:
name: frequency-range
subset-of: pin
attributes:
-
name: pad
-
name: frequency-min
-
@@ -632,6 +635,7 @@ operations:
- mode-supported
- lock-status
- lock-status-error
- clock-quality-level
- temp
- clock-id
- type
@@ -700,11 +704,9 @@ operations:
doc: |
Get list of pins and its attributes.
- dump request without any attributes given - list all the pins in the
system
- dump request with target dpll - list all the pins registered with
a given dpll device
- do request with target dpll and target pin - single pin attributes
- dump request - list all the registered, available pins in the
system, the request takes no attributes
- do request with target pin - single pin attributes
attribute-set: pin
flags: [admin-perm]
@@ -741,9 +743,6 @@ operations:
- measured-frequency
dump:
request:
attributes:
- id
reply: *pin-attrs
-
@@ -759,9 +758,6 @@ operations:
attributes:
- id
- frequency
- direction
- prio
- state
- parent-device
- parent-pin
- phase-adjust
+58 -1
View File
@@ -47,6 +47,7 @@ definitions:
-
name: started
doc: The firmware flashing process has started.
value: 1
-
name: in-progress
doc: The firmware flashing process is in progress.
@@ -89,6 +90,7 @@ definitions:
-
name: power-not-available
doc: Group of power_not_available states
value: 8
-
name: short-detected
doc: Group of short_detected states
@@ -97,7 +99,7 @@ definitions:
enum-name: phy-upstream
header: linux/ethtool.h
type: enum
name-prefix: phy-upstream
name-prefix: phy-upstream-
entries: [mac, phy]
-
name: tcp-data-split
@@ -210,6 +212,11 @@ definitions:
-
name: discard
value: 31
-
name: port-type
doc: type of physical connector
type: enum
entries: [mdi, sfp]
attribute-sets:
-
@@ -1905,6 +1912,32 @@ attribute-sets:
name: link
type: nest
nested-attributes: mse-snapshot
-
name: port
attr-cnt-name: --ethtool-a-port-cnt
attributes:
-
name: header
type: nest
nested-attributes: header
-
name: id
type: u32
-
name: supported-modes
type: nest
nested-attributes: bitset
-
name: supported-interfaces
type: nest
nested-attributes: bitset
-
name: type
type: u32
enum: port-type
-
name: upstream-port
type: u32
operations:
enum-model: directional
@@ -2859,6 +2892,30 @@ operations:
- worst-channel
- link
dump: *mse-get-op
-
name: port-get
doc: Get ports attached to an interface
attribute-set: port
do:
request:
attributes:
- header
- id
reply: &port-get-op-reply
attributes:
- header
- id
- supported-modes
- supported-interfaces
- type
- upstream-port
dump:
request:
attributes:
- header
reply: *port-get-op-reply
mcast-groups:
list:
+4
View File
@@ -44,12 +44,14 @@ attribute-sets:
-
name: type
type: u8
enum: encap-type
-
name: remcsum-nopartial
type: flag
-
name: local-v4
type: u32
byte-order: big-endian
-
name: local-v6
type: binary
@@ -58,6 +60,7 @@ attribute-sets:
-
name: peer-v4
type: u32
byte-order: big-endian
-
name: peer-v6
type: binary
@@ -90,6 +93,7 @@ operations:
request: &all_attrs
attributes:
- port
- af
- ipproto
- type
- remcsum-nopartial
+196
View File
@@ -0,0 +1,196 @@
# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
---
name: gtp
protocol: genetlink-legacy
doc: |
GPRS Tunnelling Protocol, user plane (GTP-U).
The gtp netdevice encapsulates and decapsulates user plane packets in
GTP-U tunnels (GTPv0 and GTPv1-U, see 3GPP TS 29.060 and TS 29.281).
This family manages the PDP contexts that describe the tunnels and
triggers GTP-U echo requests. It is driven by user space control planes
such as those built on libgtpnl.
The kernel registers the family with version 0, which the
genetlink-legacy schema cannot express.
The notifications multicast on the "gtp" group are not described: PDP
context additions and deletions, and GTP-U echo responses, reuse the
NEWPDP, DELPDP and ECHOREQ command values of the requests.
kernel-policy: global
definitions:
-
type: enum
name: version
name-prefix: gtp-
enum-name: gtp-version
header: linux/gtp.h
entries: [v0, v1]
attribute-sets:
-
name: gtp
name-prefix: gtpa-
attributes:
-
name: link
type: u32
doc: ifindex of the gtp netdevice the context is attached to.
-
name: version
type: u32
enum: version
doc: GTP version of the context, GTPv0 or GTPv1-U.
-
name: tid
type: u64
doc: Tunnel identifier, GTPv0 only.
-
name: peer-address
type: u32
byte-order: big-endian
display-hint: ipv4
doc: |
IPv4 address of the remote GSN peer (GGSN or SGSN). Also known
as GTPA_SGSN_ADDRESS, kept for legacy user space.
-
name: ms-address
type: u32
byte-order: big-endian
display-hint: ipv4
doc: IPv4 address of the mobile subscriber served by the context.
-
name: flow
type: u16
doc: Flow label, GTPv0 only.
-
name: net-ns-fd
type: u32
doc: File descriptor of the network namespace of the gtp netdevice.
-
name: i-tei
type: u32
doc: Ingress Tunnel Endpoint Identifier, GTPv1-U only.
-
name: o-tei
type: u32
doc: Egress Tunnel Endpoint Identifier, GTPv1-U only.
-
name: pad
type: pad
-
name: peer-addr6
type: binary
checks:
min-len: 16
byte-order: big-endian
display-hint: ipv6
doc: IPv6 address of the remote GSN peer (GGSN or SGSN).
-
name: ms-addr6
type: binary
checks:
min-len: 16
byte-order: big-endian
display-hint: ipv6
doc: |
IPv6 prefix of the mobile subscriber served by the context: a /64
prefix, with the lower 64 bits set to zero.
-
name: family
type: u8
doc: |
Address family (AF_INET or AF_INET6) of ms-address or ms-addr6,
AF_INET when absent. The peer address uses the family of the
tunnel socket.
operations:
list:
-
name: newpdp
doc: Create or update a PDP context.
attribute-set: gtp
value: 0
dont-validate: [strict, dump]
flags: [admin-perm]
do:
request: &pdp-attrs
attributes:
- link
- version
- tid
- peer-address
- peer-addr6
- ms-address
- ms-addr6
- flow
- i-tei
- o-tei
- family
- net-ns-fd
-
name: delpdp
doc: Delete a PDP context.
attribute-set: gtp
dont-validate: [strict, dump]
flags: [admin-perm]
do:
request: &pdp-find
attributes:
- link
- version
- tid
- ms-address
- ms-addr6
- i-tei
- family
- net-ns-fd
-
name: getpdp
doc: Get or dump one or more PDP contexts.
attribute-set: gtp
dont-validate: [strict, dump]
flags: [admin-perm]
do:
request: *pdp-find
reply: &pdp-reply
attributes:
- link
- version
- tid
- peer-address
- peer-addr6
- ms-address
- ms-addr6
- flow
- i-tei
- o-tei
- family
dump:
reply: *pdp-reply
-
name: echoreq
doc: |
Send a GTP-U echo request to a peer. ms-address is not a mobile
subscriber address here, but the local IPv4 address used as source
of the request.
attribute-set: gtp
dont-validate: [strict, dump]
flags: [admin-perm]
do:
request:
attributes:
- link
- version
- peer-address
- ms-address
- net-ns-fd
mcast-groups:
list:
-
name: gtp
+5 -4
View File
@@ -22,7 +22,8 @@ definitions:
type: enum
name: handler-class
value-start: 0
entries: [none, tlshd, max]
entries: [none, tlshd]
render-max: true
-
type: enum
name: msg-type
@@ -67,7 +68,7 @@ attribute-sets:
enum: auth
-
name: peer-identity
type: u32
type: s32
multi-attr: true
-
name: certificate
@@ -79,7 +80,7 @@ attribute-sets:
type: string
-
name: keyring
type: u32
type: s32
-
name: done
attributes:
@@ -93,7 +94,7 @@ attribute-sets:
type: s32
-
name: remote-auth
type: u32
type: s32
multi-attr: true
operations:
+3 -2
View File
@@ -80,7 +80,7 @@ definitions:
-
name: tx-checksum
doc: >-
L3 checksum HW offload is supported by the driver.
L4 checksum HW offload is supported by the driver.
-
name: tx-launch-time-fifo
doc: >-
@@ -118,7 +118,8 @@ attribute-sets:
enum: xdp-act
-
name: xdp-zc-max-segs
doc: max fragment count supported by ZC driver
doc: max buffer count per packet supported by ZC driver,
including the head buffer
type: u32
checks:
min: 1
+2 -2
View File
@@ -97,7 +97,7 @@ definitions:
- unexpected-frame
- probe-client
- register-beacons
- unexpected-4-addr-frame
- unexpected-4addr-frame
- set-noack-map
- ch-switch-notify
- start-p2p-device
@@ -202,7 +202,7 @@ definitions:
- tdls-channel-switch
- scan-random-mac-addr
- sched-scan-random-mac-addr
- no-random-mac-addr
- nd-random-mac-addr
-
name: channel-type
type: enum
+18 -2
View File
@@ -42,6 +42,16 @@ definitions:
- bitfield32
- sint
- uint
-
name: policy-byte-order
doc: |
Byte order of an integer attribute. Zero is left unused so that it
can be taken to mean host byte order.
enum-name: netlink-policy-byte-order
type: enum
value-start: 1
entries:
- big-endian
attribute-sets:
-
@@ -146,12 +156,17 @@ attribute-sets:
-
name: bitfield32-mask
type: u32
-
name: pad
type: pad
-
name: mask
type: u64
-
name: pad
type: pad
name: byte-order
doc: Byte order of the attribute, absent means host byte order.
type: u32
enum: policy-byte-order
-
name: op-policy-attrs
name-prefix: ctrl-attr-policy-
@@ -176,6 +191,7 @@ operations:
request:
value: 3
attributes:
- family-id
- family-name
reply: &all-attrs
value: 1
+2
View File
@@ -38,6 +38,8 @@ attribute-sets:
doc: |
ifindex of the main netdevice linked to the PSP device,
or the ifindex to associate with the PSP device.
Only reported to the network namespace the main netdevice
lives in, an ifindex has no meaning outside of it.
type: u32
-
name: psp-versions-cap
+18 -3
View File
@@ -77,6 +77,8 @@ definitions:
name: mcautojoin
-
name: stable-privacy
-
name: global
attribute-sets:
-
@@ -119,7 +121,7 @@ attribute-sets:
type: u32
-
name: target-netnsid
type: binary
type: s32
-
name: proto
type: u8
@@ -168,7 +170,17 @@ operations:
attributes: *ifaddr-all
-
name: getmulticast
doc: Get / dump IPv4/IPv6 multicast addresses.
doc: |
Get / dump multicast addresses. ifa-family must select the address
family: AF_INET or AF_INET6 for the IP multicast groups joined on
a device, AF_PACKET for the link-layer multicast addresses in the
device filter. Link-layer entries added explicitly, e.g. with
SIOCADDMULTI or "bridge fdb add ... self", rather than by a
protocol join are reported with the global flag set. For AF_PACKET
a non-zero ifa-index restricts the dump to that device and
ifa-prefixlen, ifa-flags and ifa-scope must be zero, AF_INET and
AF_INET6 apply this and target-netnsid with NETLINK_GET_STRICT_CHK
only.
attribute-set: addr-attrs
fixed-header: ifaddrmsg
do:
@@ -181,10 +193,13 @@ operations:
- multicast
- mc-users
- cacheinfo
- flags
- target-netnsid
dump:
request:
value: 58
attributes: []
attributes:
- target-netnsid
reply:
value: 58
attributes: *mcaddr-attrs
+28 -16
View File
@@ -25,17 +25,17 @@ definitions:
-
name: loopback
-
name: point-to-point
name: pointopoint
-
name: no-trailers
name: notrailers
-
name: running
-
name: no-arp
name: noarp
-
name: promisc
-
name: all-multi
name: allmulti
-
name: master
-
@@ -45,7 +45,7 @@ definitions:
-
name: portsel
-
name: auto-media
name: automedia
-
name: dynamic
-
@@ -309,6 +309,7 @@ definitions:
entries:
-
name: forwarding
value: 1
-
name: mc-forwarding
-
@@ -494,6 +495,10 @@ definitions:
name: ndisc-evict-nocarrier
-
name: accept-untracked-na
-
name: accept-ra-min-lft
-
name: force-forwarding
-
name: ifla-icmp6-stats
enum-name:
@@ -527,11 +532,21 @@ definitions:
-
name: indelivers
-
name: outforwdatagrams
name: noectpkts
-
name: ect1pkts
-
name: ect0pkts
-
name: cepkts
-
name: outrequests
-
name: outpkts
-
name: outoctets
-
name: outforwdatagrams
-
name: inhdrerrors
-
@@ -582,14 +597,6 @@ definitions:
name: outbcastoctets
-
name: csumerrors
-
name: noectpkts
-
name: ect1-pkts
-
name: ect0-pkts
-
name: cepkts
-
name: reasm-overlaps
- name: br-boolopt-multi
@@ -835,7 +842,7 @@ definitions:
-
name: ovpn-mode
enum-name: ovpn-mode
name-prefix: ovpn-mode
name-prefix: ovpn-mode-
type: enum
entries:
- p2p
@@ -1087,6 +1094,10 @@ attribute-sets:
-
name: tailroom
type: u16
-
name: pacing-offload
type: u32
doc: Enable EDT pacing offload (0 - disabled, 1 - enabled).
-
name: prop-list-link-attrs
subset-of: link-attrs
@@ -2220,7 +2231,7 @@ attribute-sets:
name: conf
type: binary
sub-type: u32
doc: u32 indexed by ipv6-devconf - 1 on output, on input it's a nest
doc: u32 indexed by ipv6-devconf on output, input is not yet implemented
-
name: stats
type: binary
@@ -2555,6 +2566,7 @@ operations:
- devlink-port
- gso-ipv4-max-size
- gro-ipv4-max-size
- pacing-offload
dump:
request:
value: 18
+1 -1
View File
@@ -342,7 +342,7 @@ attribute-sets:
name: interval-probe-time-ms
type: u64
checks:
min: 1
min: 1000
max: 86400000
operations:
+761
View File
@@ -0,0 +1,761 @@
# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
---
name: rt-nexthop
protocol: netlink-raw
uapi-header: linux/nexthop.h
protonum: 0
doc: >-
Nexthop object management over rtnetlink.
definitions:
-
name: nhmsg
type: struct
members:
-
name: nh-family
type: u8
-
name: nh-scope
type: u8
-
name: nh-protocol
type: u8
-
name: resvd
type: pad
len: 1
-
name: nh-flags
type: u32
enum: rtnh-f
-
name: rtnh-f
type: flags
name-prefix: rtnh-f-
enum-name:
entries:
- dead
- pervasive
- onlink
- offload
- linkdown
- unresolved
- trap
-
name: nexthop-grp
type: struct
members:
-
name: id
type: u32
-
name: weight
type: u8
-
name: weight-high
type: u8
-
name: resvd2
type: pad
len: 2
-
name: nexthop-grp-type
type: enum
name-prefix: nexthop-grp-type-
enum-name:
entries:
- mpath
- res
-
name: encap-type
type: enum
name-prefix: lwtunnel-encap-
enum-name:
entries:
- none
- mpls
- ip
- ila
- ip6
- seg6
- bpf
- seg6-local
- rpl
- ioam6
- xfrm
-
name: seg6-local-actions
type: enum
name-prefix: seg6-local-action-
enum-name:
entries:
- unspec
- end
- end-x
- end-t
- end-dx2
- end-dx6
- end-dx4
- end-dt6
- end-dt4
- end-b6
- end-b6-encap
- end-bm
- end-s
- end-as
- end-am
- end-bpf
- end-dt46
-
name: seg6-local-flv-ops
type: enum
name-prefix: seg6-local-flv-op-
enum-name:
entries:
-
name: unspec
-
name: psp
-
name: usp
-
name: usd
-
name: next-csid
-
name: nha-op-flag
type: flags
name-prefix: nha-op-flag-
enum-name:
entries:
- dump-stats
- dump-hw-stats
-
name: nha-op-flag-resp-grp-resvd-0
type: const
value: 2147483648
sub-messages:
-
name: encap-data
formats:
-
value: mpls
attribute-set: mpls-iptunnel
-
value: ip
attribute-set: lwtunnel-ip
-
value: ila
attribute-set: ila-attrs
-
value: ip6
attribute-set: lwtunnel-ip6
-
value: seg6
attribute-set: seg6-iptunnel
-
value: bpf
attribute-set: lwt-bpf
-
value: seg6-local
attribute-set: seg6-local
-
value: rpl
attribute-set: rpl-iptunnel
-
value: ioam6
attribute-set: ioam6-iptunnel
-
value: xfrm
attribute-set: lwt-xfrm
attribute-sets:
-
name: nexthop-attrs
name-prefix: nha-
attributes:
-
name: id
type: u32
-
name: group
type: binary # array of struct: nexthop-grp
-
name: group-type
type: u16
enum: nexthop-grp-type
-
name: blackhole
type: flag
-
name: oif
type: u32
-
name: gateway
type: binary
display-hint: ipv4-or-v6
-
name: encap-type
type: u16
enum: encap-type
-
name: encap
type: sub-message
sub-message: encap-data
selector: encap-type
-
name: groups
type: flag
-
name: master
type: u32
-
name: fdb
type: flag
-
name: res-group
type: nest
nested-attributes: res-group-attrs
-
name: res-bucket
type: nest
nested-attributes: res-bucket-attrs
-
name: op-flags
type: u32
checks:
flags-mask: nha-op-flag
-
name: group-stats
type: nest
nested-attributes: group-stats-attrs
-
name: hw-stats-enable
type: u32
checks:
max: 1
-
name: hw-stats-used
type: u32
-
name: dst-port
type: u16
byte-order: big-endian
checks:
min: 1
-
name: mpls-iptunnel
name-prefix: mpls-iptunnel-
header: linux/mpls_iptunnel.h
attributes:
-
name: dst
type: binary
-
name: ttl
type: u8
-
name: lwtunnel-ip
name-prefix: lwtunnel-ip-
header: linux/lwtunnel.h
attributes:
-
name: id
type: u64
byte-order: big-endian
-
name: dst
type: u32
byte-order: big-endian
display-hint: ipv4
-
name: src
type: u32
byte-order: big-endian
display-hint: ipv4
-
name: ttl
type: u8
-
name: tos
type: u8
-
name: flags
type: u16
byte-order: big-endian
-
name: pad
type: pad
-
name: opts
type: nest
nested-attributes: lwtunnel-ip-opts
-
name: ila-attrs
name-prefix: ila-attr-
header: linux/ila.h
attributes:
-
name: locator
type: u64
byte-order: big-endian
-
name: identifier
type: u64
-
name: locator-match
type: u64
byte-order: big-endian
-
name: ifindex
type: s32
-
name: dir
type: u32
-
name: pad
type: pad
-
name: csum-mode
type: u8
-
name: ident-type
type: u8
-
name: hook-type
type: u8
-
name: lwtunnel-ip6
name-prefix: lwtunnel-ip6-
header: linux/lwtunnel.h
attributes:
-
name: id
type: u64
byte-order: big-endian
-
name: dst
type: binary
display-hint: ipv6
-
name: src
type: binary
display-hint: ipv6
-
name: hoplimit
type: u8
-
name: tc
type: u8
-
name: flags
type: u16
byte-order: big-endian
-
name: pad
type: pad
-
name: opts
type: nest
nested-attributes: lwtunnel-ip-opts
-
name: seg6-iptunnel
name-prefix: seg6-iptunnel-
header: linux/seg6_iptunnel.h
attributes:
-
name: srh
type: binary
-
name: src
type: binary
display-hint: ipv6
-
name: table
type: u32
-
name: lwt-bpf
name-prefix: lwt-bpf-
header: linux/lwtunnel.h
attributes:
-
name: in
type: nest
nested-attributes: lwt-bpf-prog
-
name: out
type: nest
nested-attributes: lwt-bpf-prog
-
name: xmit
type: nest
nested-attributes: lwt-bpf-prog
-
name: xmit-headroom
type: u32
-
name: seg6-local
name-prefix: seg6-local-
header: linux/seg6_local.h
attributes:
-
name: action
type: u32
enum: seg6-local-actions
-
name: srh
type: binary
-
name: table
type: u32
-
name: nh4
type: u32
byte-order: big-endian
display-hint: ipv4
-
name: nh6
type: binary
display-hint: ipv6
-
name: iif
type: u32
-
name: oif
type: u32
-
name: bpf
type: nest
nested-attributes: seg6-local-bpf
-
name: vrftable
type: u32
-
name: counters
type: nest
nested-attributes: seg6-local-cnt
-
name: flavors
type: nest
nested-attributes: seg6-local-flv
-
name: rpl-iptunnel
name-prefix: rpl-iptunnel-
header: linux/rpl_iptunnel.h
attributes:
-
name: srh
type: binary
-
name: ioam6-iptunnel
name-prefix: ioam6-iptunnel-
header: linux/ioam6_iptunnel.h
attributes:
-
name: mode
type: u8
-
name: dst
type: binary
display-hint: ipv6
-
name: trace
type: binary
-
name: freq-k
type: u32
-
name: freq-n
type: u32
-
name: src
type: binary
display-hint: ipv6
-
name: lwt-xfrm
name-prefix: lwt-xfrm-
header: linux/lwtunnel.h
attributes:
-
name: if-id
type: u32
-
name: link
type: u32
-
name: lwtunnel-ip-opts
name-prefix: lwtunnel-ip-opts-
attributes:
-
name: geneve
type: binary
-
name: vxlan
type: nest
nested-attributes: lwtunnel-ip-opt-vxlan
-
name: erspan
type: nest
nested-attributes: lwtunnel-ip-opt-erspan
-
name: lwtunnel-ip-opt-vxlan
name-prefix: lwtunnel-ip-opt-vxlan-
attributes:
-
name: gbp
type: u32
-
name: lwtunnel-ip-opt-erspan
name-prefix: lwtunnel-ip-opt-erspan-
attributes:
-
name: ver
type: u8
-
name: index
type: u32
byte-order: big-endian
-
name: dir
type: u8
-
name: hwid
type: u8
-
name: lwt-bpf-prog
name-prefix: lwt-bpf-prog-
attributes:
-
name: fd
type: u32
-
name: name
type: string
checks:
max-len: 256
-
name: seg6-local-bpf
name-prefix: seg6-local-bpf-
attr-max-name: seg6-local-bpf-prog-max
attributes:
-
name: prog
type: u32
-
name: prog-name
type: string
checks:
max-len: 256
-
name: seg6-local-cnt
name-prefix: seg6-local-cnt-
attributes:
-
name: pad
type: pad
-
name: packets
type: u64
-
name: bytes
type: u64
-
name: errors
type: u64
-
name: seg6-local-flv
name-prefix: seg6-local-flv-
attributes:
-
name: operation
type: u32
enum: seg6-local-flv-ops
enum-as-flags: true
-
name: lcblock-bits
type: u8
-
name: lcnode-fn-bits
type: u8
-
name: res-group-attrs
name-prefix: nha-res-group-
attributes:
-
name: pad
type: pad
value: 0
-
name: buckets
type: u16
-
name: idle-timer
type: u32
-
name: unbalanced-timer
type: u32
-
name: unbalanced-time
type: u64
-
name: res-bucket-attrs
name-prefix: nha-res-bucket-
attributes:
-
name: pad
type: pad
value: 0
-
name: index
type: u16
-
name: idle-time
type: u64
-
name: nh-id
type: u32
-
name: group-stats-attrs
name-prefix: nha-group-stats-
attributes:
-
name: entry
type: nest
nested-attributes: group-stats-entry-attrs
multi-attr: true
-
name: group-stats-entry-attrs
name-prefix: nha-group-stats-entry-
attributes:
-
name: id
type: u32
-
name: packets
type: uint
-
name: packets-hw
type: uint
operations:
enum-model: directional
fixed-header: nhmsg
name-prefix: rtm-
list:
-
name: newnexthop
doc: Add new nexthop entry
attribute-set: nexthop-attrs
do:
request:
value: 104
attributes:
- id
- group
- group-type
- blackhole
- oif
- gateway
- encap-type
- encap
- fdb
- res-group
- hw-stats-enable
- dst-port
-
name: delnexthop
doc: Delete nexthop with given id.
attribute-set: nexthop-attrs
do:
request:
value: 105
attributes:
- id
-
name: getnexthop
doc: Get or dump nexthop entries
attribute-set: nexthop-attrs
do:
request:
value: 106
attributes:
- id
- op-flags
reply:
value: 104
attributes: &nexthop-all-attrs
- id
- group
- group-type
- blackhole
- oif
- gateway
- encap-type
- encap
- fdb
- res-group
- op-flags
- group-stats
- hw-stats-enable
- hw-stats-used
- dst-port
dump:
request:
value: 106
attributes:
- oif
- groups
- master
- fdb
- op-flags
reply:
value: 104
attributes: *nexthop-all-attrs
-
name: newnexthop-ntf
doc: Notification about a created nexthop.
value: 104
notify: getnexthop
-
name: delnexthop-ntf
doc: Notification about a deleted nexthop.
value: 105
notify: getnexthop
-
name: getnexthopbucket
doc: Get or dump nexthop buckets
attribute-set: nexthop-attrs
do:
request:
value: 118
attributes: &nexthop-bucket-all-attrs
- id
- res-bucket
reply:
value: 116
attributes: *nexthop-bucket-all-attrs
dump:
request:
value: 118
attributes:
- id
- oif
- master
- res-bucket
reply:
value: 116
attributes: *nexthop-bucket-all-attrs
-
name: newnexthopbucket-ntf
doc: Notification about a created nexthop bucket.
value: 116
notify: getnexthopbucket
mcast-groups:
list:
-
name: rtnlgrp-nexthop
value: 32
+429 -1
View File
@@ -99,6 +99,97 @@ definitions:
name: ra-withdrawn
doc: A Router Advertisement withdrew the route with a zero
lifetime.
-
name: encap-type
type: enum
name-prefix: lwtunnel-encap-
enum-name:
entries:
- none
- mpls
- ip
- ila
- ip6
- seg6
- bpf
- seg6-local
- rpl
- ioam6
- xfrm
-
name: seg6-local-actions
type: enum
name-prefix: seg6-local-action-
enum-name:
entries:
- unspec
- end
- end-x
- end-t
- end-dx2
- end-dx6
- end-dx4
- end-dt6
- end-dt4
- end-b6
- end-b6-encap
- end-bm
- end-s
- end-as
- end-am
- end-bpf
- end-dt46
-
name: seg6-local-flv-ops
type: enum
name-prefix: seg6-local-flv-op-
enum-name:
entries:
-
name: unspec
-
name: psp
-
name: usp
-
name: usd
-
name: next-csid
sub-messages:
-
name: encap-data
formats:
-
value: mpls
attribute-set: mpls-iptunnel
-
value: ip
attribute-set: lwtunnel-ip
-
value: ila
attribute-set: ila-attrs
-
value: ip6
attribute-set: lwtunnel-ip6
-
value: seg6
attribute-set: seg6-iptunnel
-
value: bpf
attribute-set: lwt-bpf
-
value: seg6-local
attribute-set: seg6-local
-
value: rpl
attribute-set: rpl-iptunnel
-
value: ioam6
attribute-set: ioam6-iptunnel
-
value: xfrm
attribute-set: lwt-xfrm
attribute-sets:
-
@@ -174,9 +265,12 @@ attribute-sets:
-
name: encap-type
type: u16
enum: encap-type
-
name: encap
type: binary # tunnel specific nest
type: sub-message
sub-message: encap-data
selector: encap-type
-
name: expires
type: u32
@@ -277,6 +371,340 @@ attribute-sets:
-
name: fastopen-no-cookie
type: u32
-
name: mpls-iptunnel
name-prefix: mpls-iptunnel-
header: linux/mpls_iptunnel.h
attributes:
-
name: dst
type: binary
-
name: ttl
type: u8
-
name: lwtunnel-ip
name-prefix: lwtunnel-ip-
header: linux/lwtunnel.h
attributes:
-
name: id
type: u64
byte-order: big-endian
-
name: dst
type: u32
byte-order: big-endian
display-hint: ipv4
-
name: src
type: u32
byte-order: big-endian
display-hint: ipv4
-
name: ttl
type: u8
-
name: tos
type: u8
-
name: flags
type: u16
byte-order: big-endian
-
name: pad
type: pad
-
name: opts
type: nest
nested-attributes: lwtunnel-ip-opts
-
name: ila-attrs
name-prefix: ila-attr-
header: linux/ila.h
attributes:
-
name: locator
type: u64
byte-order: big-endian
-
name: identifier
type: u64
-
name: locator-match
type: u64
byte-order: big-endian
-
name: ifindex
type: s32
-
name: dir
type: u32
-
name: pad
type: pad
-
name: csum-mode
type: u8
-
name: ident-type
type: u8
-
name: hook-type
type: u8
-
name: lwtunnel-ip6
name-prefix: lwtunnel-ip6-
header: linux/lwtunnel.h
attributes:
-
name: id
type: u64
byte-order: big-endian
-
name: dst
type: binary
display-hint: ipv6
-
name: src
type: binary
display-hint: ipv6
-
name: hoplimit
type: u8
-
name: tc
type: u8
-
name: flags
type: u16
byte-order: big-endian
-
name: pad
type: pad
-
name: opts
type: nest
nested-attributes: lwtunnel-ip-opts
-
name: seg6-iptunnel
name-prefix: seg6-iptunnel-
header: linux/seg6_iptunnel.h
attributes:
-
name: srh
type: binary
-
name: src
type: binary
display-hint: ipv6
-
name: table
type: u32
-
name: lwt-bpf
name-prefix: lwt-bpf-
header: linux/lwtunnel.h
attributes:
-
name: in
type: nest
nested-attributes: lwt-bpf-prog
-
name: out
type: nest
nested-attributes: lwt-bpf-prog
-
name: xmit
type: nest
nested-attributes: lwt-bpf-prog
-
name: xmit-headroom
type: u32
-
name: seg6-local
name-prefix: seg6-local-
header: linux/seg6_local.h
attributes:
-
name: action
type: u32
enum: seg6-local-actions
-
name: srh
type: binary
-
name: table
type: u32
-
name: nh4
type: u32
byte-order: big-endian
display-hint: ipv4
-
name: nh6
type: binary
display-hint: ipv6
-
name: iif
type: u32
-
name: oif
type: u32
-
name: bpf
type: nest
nested-attributes: seg6-local-bpf
-
name: vrftable
type: u32
-
name: counters
type: nest
nested-attributes: seg6-local-cnt
-
name: flavors
type: nest
nested-attributes: seg6-local-flv
-
name: rpl-iptunnel
name-prefix: rpl-iptunnel-
header: linux/rpl_iptunnel.h
attributes:
-
name: srh
type: binary
-
name: ioam6-iptunnel
name-prefix: ioam6-iptunnel-
header: linux/ioam6_iptunnel.h
attributes:
-
name: mode
type: u8
-
name: dst
type: binary
display-hint: ipv6
-
name: trace
type: binary
-
name: freq-k
type: u32
-
name: freq-n
type: u32
-
name: src
type: binary
display-hint: ipv6
-
name: lwt-xfrm
name-prefix: lwt-xfrm-
header: linux/lwtunnel.h
attributes:
-
name: if-id
type: u32
-
name: link
type: u32
-
name: lwtunnel-ip-opts
name-prefix: lwtunnel-ip-opts-
attributes:
-
name: geneve
type: binary
-
name: vxlan
type: nest
nested-attributes: lwtunnel-ip-opt-vxlan
-
name: erspan
type: nest
nested-attributes: lwtunnel-ip-opt-erspan
-
name: lwtunnel-ip-opt-vxlan
name-prefix: lwtunnel-ip-opt-vxlan-
attributes:
-
name: gbp
type: u32
-
name: lwtunnel-ip-opt-erspan
name-prefix: lwtunnel-ip-opt-erspan-
attributes:
-
name: ver
type: u8
-
name: index
type: u32
byte-order: big-endian
-
name: dir
type: u8
-
name: hwid
type: u8
-
name: lwt-bpf-prog
name-prefix: lwt-bpf-prog-
attributes:
-
name: fd
type: u32
-
name: name
type: string
checks:
max-len: 256
-
name: seg6-local-bpf
name-prefix: seg6-local-bpf-
attr-max-name: seg6-local-bpf-prog-max
attributes:
-
name: prog
type: u32
-
name: prog-name
type: string
checks:
max-len: 256
-
name: seg6-local-cnt
name-prefix: seg6-local-cnt-
attributes:
-
name: pad
type: pad
-
name: packets
type: u64
-
name: bytes
type: u64
-
name: errors
type: u64
-
name: seg6-local-flv
name-prefix: seg6-local-flv-
attributes:
-
name: operation
type: u32
enum: seg6-local-flv-ops
enum-as-flags: true
-
name: lcblock-bits
type: u8
-
name: lcnode-fn-bits
type: u8
operations:
enum-model: directional
+1 -1
View File
@@ -42,7 +42,7 @@ definitions:
- skip-hw
- skip-sw
- in-hw
- not-in-nw
- not-in-hw
- verbose
-
name: flower-key-ctrl-flags
+7 -11
View File
@@ -32,7 +32,7 @@ attribute-sets:
name: addr-ipv6
type: binary
checks:
min-len: 16
exact-len: 16
byte-order: big-endian
display-hint: ipv6
-
@@ -63,7 +63,7 @@ attribute-sets:
name: fopen-cookie
type: binary
checks:
min-len: tcp-fastopen-cookie-max
max-len: tcp-fastopen-cookie-max
-
name: saddr-ipv4
type: u32
@@ -73,7 +73,7 @@ attribute-sets:
name: saddr-ipv6
type: binary
checks:
min-len: 16
exact-len: 16
byte-order: big-endian
display-hint: ipv6
-
@@ -93,14 +93,12 @@ attribute-sets:
name: rtt
type: u32
doc: |
Round Trip Time (RTT), in msecs with 3 bits fractional
(left-shift by 3 to get the msec value).
Round Trip Time (RTT), in msecs with 3 bits fractional.
-
name: rttvar
type: u32
doc: |
Round Trip Time VARiance (RTT), in msecs with 2 bits fractional
(left-shift by 2 to get the msec value).
Round Trip Time VARiance (RTTVAR), in msecs with 2 bits fractional.
-
name: ssthresh
type: u32
@@ -117,14 +115,12 @@ attribute-sets:
name: rtt-us
type: u32
doc: |
Round Trip Time (RTT), in usecs, with 3 bits fractional
(left-shift by 3 to get the msec value).
Round Trip Time (RTT), in usecs, with 3 bits fractional.
-
name: rttvar-us
type: u32
doc: |
Round Trip Time (RTT), in usecs, with 2 bits fractional
(left-shift by 3 to get the msec value).
Round Trip Time VARiance (RTTVAR), in usecs, with 2 bits fractional.
operations:
list:
+3 -2
View File
@@ -277,8 +277,9 @@ Netfilter
=========
The bridge netfilter module is a legacy feature that allows to filter bridged
packets with iptables and ip6tables. Its use is discouraged. Users should
consider using nftables for packet filtering.
packets with iptables and ip6tables. This feature is scheduled for removal and
not available in user namespaces. Consider using nftables for packet filtering
instead.
The older ebtables tool is more feature-limited compared to nftables, but
just like nftables it doesn't need this module either to function.
@@ -48,6 +48,7 @@ Contents:
meta/fbnic
microsoft/netvsc
mucse/rnpgbe
nebula-matrix/nbl
netronome/nfp
pensando/ionic
pensando/ionic_rdma
@@ -692,7 +692,7 @@ queues: for each tc, <num queues>@<offset> (e.g. queues 16@0 16@16 assigns
16 queues to tc0 at offset 0 and 16 queues to tc1 at offset 16. Max total
number of queues for all tcs is 64 or number of cores, whichever is lower.)
hw 1 mode channel: ‘channel’ with ‘hw’ set to 1 is a new new hardware
hw 1 mode channel: ‘channel’ with ‘hw’ set to 1 is a new hardware
offload mode in mqprio that makes full use of the mqprio options, the
TCs, the queue configurations, and the QoS parameters.
@@ -171,7 +171,7 @@ queues: for each tc, <num queues>@<offset> (e.g. queues 16@0 16@16 assigns
16 queues to tc0 at offset 0 and 16 queues to tc1 at offset 16. Max total
number of queues for all tcs is 64 or number of cores, whichever is lower.)
hw 1 mode channel: ‘channel’ with ‘hw’ set to 1 is a new new hardware
hw 1 mode channel: ‘channel’ with ‘hw’ set to 1 is a new hardware
offload mode in mqprio that makes full use of the mqprio options, the
TCs, the queue configurations, and the QoS parameters.
@@ -116,5 +116,3 @@ XDP support
before running XDP::
ethtool -K eth0 lro off
XDP_REDIRECT action is not yet supported.
@@ -0,0 +1,28 @@
.. SPDX-License-Identifier: GPL-2.0
================================================================
Linux Base Driver for Nebula-matrix m18110-NIC/m18000-NIC family
================================================================
Overview:
=========
The m18110-NIC/m18000-NIC (marketed as SNIC s1000) is a series
of network interface cards for the Data Center Area.
This driver provides the core infrastructure for m18110/m18000-NIC
devices, including:
- PCI device enumeration and resource (BAR) management
- Firmware command interface via PF mailbox
- Channel-based communication between driver and firmware
- Device initialization and teardown
Support
=======
For more information about m18110-NIC/m18000-NIC, please visit the following URL:
https://www.nebula-matrix.com/snic_s1000_en
If an issue is identified with the released source code on the supported kernel
with a supported adapter, email the specific information related to the issue to
[email protected].

Some files were not shown because too many files have changed in this diff Show More