Merge tag 'devicetree-fixes-for-7.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:
 "All of these are patches that didn't get picked up for the merge
  window. They all fix new warnings because the corresponding .dts
  changes did get applied

   - Add Altera Agilex5 DWC3 controller and Raspberry Pi RP1 PWM
     controller bindings

   - Make "peer-hub" property optional on cypress,hx3 USB hubs"

* tag 'devicetree-fixes-for-7.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: usb: add Altera Agilex5 DWC3 controller
  dt-bindings: pwm: Add Raspberry Pi RP1 PWM controller
  dt-bindings: usb: cypress,hx3: make peer-hub property optional
This commit is contained in:
Linus Torvalds
2026-11-07 11:28:55 -08:00
3 changed files with 178 additions and 1 deletions
@@ -0,0 +1,66 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pwm/raspberrypi,rp1-pwm.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Raspberry Pi RP1 PWM controller
maintainers:
- Naushir Patuck <[email protected]>
- Andrea della Porta <[email protected]>
- Stanimir Varbanov <[email protected]>
allOf:
- $ref: pwm.yaml#
description: |
The PWM peripheral is a flexible waveform generator with a
variety of operational modes. It has the following features:
- four independent output channels
- 32-bit counter widths
- Seven output generation modes
- Optional per-channel output inversion
- Optional duty-cycle data FIFO with DMA support
- Optional sigma-delta noise shaping engine
Serves as a fan speed provider to other nodes for a PWM-connected
fan.
properties:
compatible:
const: raspberrypi,rp1-pwm
reg:
maxItems: 1
clocks:
maxItems: 1
"#pwm-cells":
const: 3
dmas:
maxItems: 1
description: |
Phandle to the DMA controller and the channel specifier for
the duty-cycle FIFO.
dma-names:
items:
- const: tx
required:
- compatible
- reg
- clocks
unevaluatedProperties: false
examples:
- |
pwm@98000 {
compatible = "raspberrypi,rp1-pwm";
reg = <0x98000 0x100>;
clocks = <&rp1_clocks 17>;
#pwm-cells = <3>;
};
@@ -0,0 +1,112 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/altr,agilex5-dwc3.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Altera Agilex5 DWC3 USB SoC Controller
maintainers:
- Adrian Ng Ho Yin <[email protected]>
description:
The Altera Agilex5 SoCFPGA integrates a Synopsys DesignWare USB3 (DWC3)
controller that supports host, device and DRD modes.
allOf:
- $ref: snps,dwc3-common.yaml#
properties:
compatible:
const: altr,agilex5-dwc3
reg:
maxItems: 1
clocks:
items:
- description: Master/Core bus clock
- description: Controller reference clock
- description: Controller suspend clock
clock-names:
items:
- const: bus_early
- const: ref
- const: suspend
interrupts:
maxItems: 1
phys:
minItems: 2
maxItems: 2
phy-names:
items:
- const: usb2-phy
- const: usb3-phy
iommus:
maxItems: 1
resets:
items:
- description: DWC3 core reset
- description: DWC3 ECC reset
reset-names:
items:
- const: core
- const: ecc
dr_mode: true
maximum-speed: true
snps,dis_u2_susphy_quirk: true
snps,dis_u3_susphy_quirk: true
required:
- compatible
- reg
- clocks
- clock-names
- interrupts
- phys
- phy-names
- resets
- reset-names
- snps,dis_u2_susphy_quirk
- snps,dis_u3_susphy_quirk
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/altr,rst-mgr-s10.h>
#include <dt-bindings/clock/intel,agilex5-clkmgr.h>
soc {
#address-cells = <1>;
#size-cells = <1>;
usb@11000000 {
compatible = "altr,agilex5-dwc3";
reg = <0x11000000 0x100000>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkmgr AGILEX5_USB31_BUS_CLK_EARLY>,
<&clkmgr AGILEX5_USB31_SUSPEND_CLK>,
<&clkmgr AGILEX5_USB31_SUSPEND_CLK>;
clock-names = "bus_early", "ref", "suspend";
phys = <&usbphy0>, <&usbphy1>;
phy-names = "usb2-phy", "usb3-phy";
resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
reset-names = "core", "ecc";
iommus = <&smmu 7>;
snps,dis_u2_susphy_quirk;
snps,dis_u3_susphy_quirk;
};
};
@@ -53,7 +53,6 @@ properties:
required:
- compatible
- reg
- peer-hub
- vdd-supply
- vdd2-supply